Re: [Amps] Henry 3K-A choke failure...workaround?

[donroden@hiwaay.net]

P--------mmmmmmmm--------G   ??

Don W4DNR


Quoting Jim <jimw7ry@gmail.com>:

> Can you please draw me a diagram of the*plate choke *in the ground  
> lead please?
> Thanks
> 73
> Jim W7RY
>
> On 9/26/2019 9:59 PM, Ron wrote:
> >   Jeff wa1hco millar wrote:
> >
> > > Hello wise ones...
> > > Bought a nice 3K-A at a flea market and made one SSB contact.  On the
> > > second contact it tripped off on HV overcurrent.  After some debugging, the
> > > Plate choke is leaky to ground at HV but open with an Ohm meter.
> > > Can I just put the choke up on insulated standoffs?
> > > Any other suggestions?
> >   It is a pleasure to be helpful.
> >
> >   The CURE is to put it in the ground side of the circuit, typically
> > where the rectifier or the grounded side of the transformer goes to
> > ground.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps