> ...snip... In addition I want to measure the field
> strength with the different ground system components as well. (also
> using the LP-100). My question is how far away from the antenna
> should I measure the field strength?
I recall reading somewhere that you should be at least 10 wavelengths
distant from the antenna. This is to ensure you are out of the near
field when taking the measurement.
I've always wondered however, if the near field wouldn't also show a
similar change in field measurements as the far field.
Erik n0ew
_______________________________________________
Antennaware mailing list
Antennaware@contesting.com
http://lists.contesting.com/mailman/listinfo/antennaware
|