Antennaware
[Top] [All Lists]

Re: [Antennaware] Modding the 6M Cushcraft A505S?

To: <jkaufmann@alum.mit.edu>, <Gary@ka1j.com>, <antennaware@contesting.com>
Subject: Re: [Antennaware] Modding the 6M Cushcraft A505S?
From: "Gary Myers" <garymyers@powerc.net>
Date: Thu, 22 Sep 2016 16:13:09 -0400
List-post: <antennaware@contesting.com">mailto:antennaware@contesting.com>
With that info I'd have to concur - I had a feeling it wasn't really designed for the DX end of the band - it is a general coverage antenna... M2 makes a great antenna - I have 8 of their yagis from 20 through 2 ...

if you can do it - that might be the way to go.

Note even if it has a gamma match one would still want to put a balun on it to keep currents off the outer shield.

you might also want to check out F12's antennas....

g.



-----Original Message----- From: John Kaufmann
Sent: Thursday, September 22, 2016 3:58 PM
To: Gary@ka1j.com ; antennaware@contesting.com
Subject: Re: [Antennaware] Modding the 6M Cushcraft A505S?

I've used both the A505S and the 6M5XHP.  I don't there is anything in the
Cushcraft that prevents it from accepting 1500W.  It has a gamma match and
not a balun.

The 6M5XHP is a much higher quality product.  The gain difference isn't that
much (1.5 dB more gain for the M2) but the quality of the M2 hardware is
vastly superior to Cushcraft.  The elements on my A505S were all crooked on
the boom because the mounting clamps were not square.  Also the A505S
factory dimensions do not produce a very good pattern at the low end of 50
MHz where the DX is.  I got a set of modified dimensions for the A505S from
W1JR, which greatly improved the pattern.

If you can swing it, go for the 6M5XHP.

73, John W1FV

-----Original Message-----
From: Antennaware [mailto:antennaware-bounces@contesting.com] On Behalf Of
Gary Smith
Sent: Thursday, September 22, 2016 3:29 PM
To: antennaware@contesting.com
Subject: [Antennaware] Modding the 6M Cushcraft A505S?

I was considering making a 6M Yagi and
still would like to but realising my time constraints with upcoming
ankle/leg surgery this fall, I'm better to buy a turnkey antenna and put it
together on the roof and just be done with it. Until I relocate to a better
place to put up antennas have a tower.

It was suggested to the me that the 5
element Cushcraft A505S is a good choice but I see it has a 1KW limit and I
want something with a 1.5KW limit as I have a 1.5KW King Conversions amp.
Has anyone any experience in converting this antenna into one that takes
1.5KW?

Another option is the five element M2
6M5XHP which works fine with 1.5KW, will fit in the required location, but
costs twice as much as the Cushcraft.

Looking at the $ involved, the Cushcraft, if it can be easily modded to
handle the power, is a much more lucrative option.
I'm pretty sure the M2 is a nicer antenna overall.

Any Idears?

73,

Gary
KA1J
_______________________________________________
Antennaware mailing list
Antennaware@contesting.com
http://lists.contesting.com/mailman/listinfo/antennaware

_______________________________________________
Antennaware mailing list
Antennaware@contesting.com
http://lists.contesting.com/mailman/listinfo/antennaware
_______________________________________________
Antennaware mailing list
Antennaware@contesting.com
http://lists.contesting.com/mailman/listinfo/antennaware

<Prev in Thread] Current Thread [Next in Thread>