CQ-Contest
[Top] [All Lists]

[CQ-Contest] Noise canceling headphones

Subject: [CQ-Contest] Noise canceling headphones
From: scace@uu.net (Eric Scace)
Date: Tue Dec 14 21:10:20 1999
I don't think noise canceling headphones do much to shut out the
loud-mouthed operator sitting next to you.  That does not meet the profile
of "noise".  They will cancel white- and pink-noise sounds such as the fans
on amplifiers.

-- Eric K3NA

-----Original Message-----
From: owner-cq-contest@contesting.com
[mailto:owner-cq-contest@contesting.com]On Behalf Of AA4NC@aol.com
Sent: 1999 December 14 Tuesday 07:09
To: paule@sfu.ca
Cc: cq-contest@contesting.com
Subject: Re: [CQ-Contest] Noise cancelling headphones



The noise cancellers work great in VERY noisy environments with lots of low
frequency noise. Most are made to attenuate noise by 15-20 dB in the 60-150
Hz region that are generated by propeller driven airplanes. I couldn't live
without mine in the plane, but I don't think they are worth the money or
effort for radio use, unless you have some really loud operators in a M/M...

73,

Will AA4NC / W4MR



n a message dated 12/13/99 4:08:30 PM Eastern Standard Time, paule@sfu.ca
writes:

<< Has anyone had any experience with "noise cancelling" headphones?
 I just tried a pair of Sony MDNR5's and they look promising.
 I am getting ready for a multi multi operation next year, and
 need a set of headphones for a noisey environment. I usually
 use one of a couple of pairs of Sennheiser phones that I have,
 and they are fine for a relatively quiet environment. I
 should mention that these are for cw purposes, and I don't
 want to be distracted by the ssb op next to me...

 Thanks for the time.

 cheers, Paul VE7CQK/email: paule@sfu.ca
  >>


--
CQ-Contest on WWW:        http://www.contesting.com/_cq-contest/
Administrative requests:  cq-contest-REQUEST@contesting.com



--
CQ-Contest on WWW:        http://www.contesting.com/_cq-contest/
Administrative requests:  cq-contest-REQUEST@contesting.com


<Prev in Thread] Current Thread [Next in Thread>