You didn't look very hard. When the radio is connected to the
computer, the radio's frequency is polled periodically and recorded
with the QSO. Even if it isn't connected, the program stores what it
thinks is the radio's frequency. It can be edited in the QSO dialog
for both transmit and receive frequencies. The frequency, to the
resolution of KHz, is exported in the Cabrillo log. I just connected
my radio, set N1MM for that type of radio, and it did the rest. The
SS log I submitted to ARRL contained the frequency for each QSO.
See section 19 of the N1MM Manual for info on the QSO Edit Contact
Dialog.
On Dec 10, 2007, at 1:36 AM, Jim Smith wrote:
> Hi Steve,
>
> I thought I would follow your suggestion. I couldn't find anywhere in
> N1MM a way to have the actual QRG recorded in the Cabrillo file.
>
> If you can tell me how to do it, I will.
>
> 73, Jim VE7FO
>
> Steve London wrote:
>> Here's something that everyone can do to help catch the cheaters:
>>
>> Configure your contest software and radio interface so that your
>> submitted
>> Cabrillo log shows the exact frequency that each QSO took place on
>> - i.e. 14036,
>> rather than 14000. Then send in your log, no matter how small.
>>
>> Trust me, being able to reconstruct a suspected cheater's log
>> using QSO
>> frequency info from an independent source does make a difference.
>>
>> 73,
>> Steve, N2IC
>>
>> _______________________________________________
>> CQ-Contest mailing list
>> CQ-Contest@contesting.com
>> http://lists.contesting.com/mailman/listinfo/cq-contest
>>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
- Jack Brindle, W6FB
------------------------------------------------------------------------
---------------------
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|