Scores are a product of many factors that are entirely the responsibility of
the person controlling the operation. We want to take propagation out of the
equation.
The only way to do that is to determine the actual difference between areas.
That clearly cannot be done with scores.
There are two steps to solving this problem. First we have to know how much
a path loss change actually affects contacts or scores. Second we have to
know how much the average path loss changes with different locations.
I found only one attempt at determining score vs. signal level (power), but
the information processing method was so seriously flawed it is really
totally useless. Signal level (or path loss) related to contacts or scores
seems to be an unknown, and may never be solvable because of all the
variables.
We can quantify path differences pretty easy though.
All we need to do is setup a few test beacons using identical very
repeatable antennas in different areas with known power and let them run
over a period of solar conditions. Then we look at skimmer comparisons.
This would establish a typical path loss and opening duration for different
geographical locations.
>From that we have a very useful tool.
I'm pretty sure there is software around that estimates things like this,
but most likely it is not well verified. This would verify the software, if
working software exists. It would also give us a real basis for any
correction or geographical scoring.
I'm pretty busy, but I'd be willing to work with a group of people
interested in this. It would be something VERY interesting to learn. The
equipment and work would be minimal.
The very least we would get out of this, even if we could never translate it
to what the real differences in score are, is to put a number on claims
certain areas are at an insurmountable disadvantage. For example we might be
able to say with some authority one area has xx% of the opening time and xx%
average signal strength of another area.
This really should have been done long before any proposal was made.
Doing any correction by score alone is totally useless, unless we decide we
want an overall handicap system and operator skills and station construction
do not matter.
For example if K3LR and I set up 100 watt transmitters on automatic keyers
into dipoles and just let them run as often as possible at the same time
during contest season, over a period of months we would get a really good
idea exactly what geographic differences are. This would involve very
minimal effort and time, and also give me a very good idea how my station
compares to Tim's. Not only would this get the egos out of the equation, we
would then learn when something is obviously wrong with something we are
doing.
It would give us a baseline for everyone to know how much signal level
difference there should be on average between areas.
I'm fairly excited at the prospect of doing something that can benefit all
of us!! This could be one of the best QST articles ever, because it would be
the ultimate BS filter on why some people actually have better results than
others. It would stop a lot of negativity. :-)
73 Tom
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|