Hi,
I use VSPE which I think is the standard of this kind.
http://www.eterlogic.com/Products.VSPE.html
It's free for XP (32bit) platform, but you have to pay nominal fee for
64bit OS like Win7.
Use the splitter function. You have to set serial parameters
correctly. The serial speed should be the same among sharing devices
and the created virtual port.
I always open several logging programs at the same time and use the
CAT control all for the same transceiver.
But do not use FSK over this. It won't work since it's not a serial
communication.
However, I found COM port CW and PTT will work even though they are
not serial communications.
Good luck,
73 rin JG1VGX
On Thu, May 30, 2013 at 8:52 AM, <Ktfrog007@aol.com> wrote:
> Hi,
>
> My main rig is an FT-2000 which has one serial port that I use all the
> time for rig control with the N1MM logger (using a USB-serial cable). There
> are other programs that would also like to use the serial port and I wonder
> if there is any way I can have two or more programs use the FT-2K's one
> serial port at the same time?
>
> 73,
> Kermit (Ken), AB1J
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
--
73 de rin JG1VGX
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|