CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] Multi 2 locking device, TriPlexers and BPF

To: cq-contest <cq-contest@contesting.com>
Subject: Re: [CQ-Contest] Multi 2 locking device, TriPlexers and BPF
From: Jim Brown <k9yc@audiosystemsgroup.com>
Reply-to: k9yc@arrl.net
Date: Wed, 11 Jan 2017 12:00:11 -0800
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
On Wed,1/11/2017 5:32 AM, Jorge CX6VM wrote:
If I buy the 6x2 or 8x2 from 4O3A, is just a replacement of the six pack or I 
will need a computer to control it

Jorge,

Both the 6x2 and 8x2 from 4O3A can be controlled from the same band decoder used to control the six pak. Control wiring for the 6x2 terminates on two DB9 connector, and for the 8x2 on two DB15 connectors, one for each side of the switch. You will need to supply those connectors and connect wiring from your existing controller (the Bandmaster).

73, Jim K9YC

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>