CT-User
[Top] [All Lists]

CT and IC-736 or IC-738?

To: <ct-user@contesting.com>
Subject: CT and IC-736 or IC-738?
From: ken.silverman@atlas.ccmail.airtouch.com (ken silverman)
Date: Wed, 01 Mar 95 09:45:53 PST
     I use CT successfully with the IC 736.  You need to set the address of 
     the radio to that of another Icom rig configured in CT, and then 
     select that radio in CT.  I tested mine using the configurations for 
     the 735, 765, 781, and they all worked fine.  The default value for 
     each radio is different, so you must go into the radio (software 
     controlled in Icom, and is in the manual) and change the addr.
     
     If you need the addrs of Icom radios, I can get them to you twr, or 
     you just call Icom tech support.
     
     Ken WM2C
     
     ken.silverman@airtouch.com


______________________________ Reply Separator _________________________________
Subject: CT and IC-736 or IC-738?
Author:  frenaye@pcnet.com at atlas
To: <ct-user@contesting.com>
Date:    3/1/95 1:11 AM


Anyone tested CT with the IC-736 or IC-738?  Do any of the radio choices in 
CT work OK with them?
     
------------------------------------------------------ 
E-mail: frenaye@pcnet.com  
Tom Frenaye, K1KI, P O Box 386, West Suffield CT 06093 
Phone: 203-668-5444
     
     
     
--
Submissions:              ct-user@eng.pko.dec.com 
Administrative requests:  ct-user-request@eng.pko.dec.com 
Problems:                 reisert@eng.pko.dec.com
     

--
Submissions:              ct-user@eng.pko.dec.com
Administrative requests:  ct-user-request@eng.pko.dec.com
Problems:                 reisert@eng.pko.dec.com

<Prev in Thread] Current Thread [Next in Thread>