CT-User
[Top] [All Lists]

ct and ic-736 or ic-738?

To: <ct-user@contesting.com>
Subject: ct and ic-736 or ic-738?
From: ken.silverman@bbs.logicnet.com (ken.silverman@bbs.logicnet.com)
Date: Tue, 07 Mar 1995 21:58:24
To: <ct-user@contesting.com>
Date: Wed, 01 Mar 95 09:45:53 PST
To: ct-user@eng.pko.dec.com, frenaye@pcnet.com
Subject: Re: CT and IC-736 or IC-738?

I use CT successfully with the IC 736.  You need to set the address of
the radio to that of another Icom rig configured in CT, and then
select that radio in CT.  I tested mine using the configurations for
the 735, 765, 781, and they all worked fine.  The default value for
each radio is different, so you must go into the radio (software
controlled in Icom, and is in the manual) and change the addr.

If you need the addrs of Icom radios, I can get them to you twr, or
you just call Icom tech support.

Ken WM2C

ken.silverman@airtouch.com


______________________________ Reply Separator ________________________________
Subject: CT and IC-736 or IC-738?
Author:  frenaye@pcnet.com at atlas
To: <ct-user@contesting.com>
Date:    3/1/95 1:11 AM


Anyone tested CT with the IC-736 or IC-738?  Do any of the radio choices in
CT work OK with them?

------------------------------------------------------
E-mail: frenaye@pcnet.com
Tom Frenaye, K1KI, P O Box 386, West Suffield CT 06093
Phone: 203-668-5444



--
Submissions:              ct-user@eng.pko.dec.com
Administrative requests:  ct-user-request@eng.pko.dec.com
Problems:                 reisert@eng.pko.dec.com


--
Submissions:              ct-user@eng.pko.dec.com
Administrative requests:  ct-user-request@eng.pko.dec.com
Problems:                 reisert@eng.pko.dec.com

                                                                                
    

--
Submissions:              ct-user@eng.pko.dec.com
Administrative requests:  ct-user-request@eng.pko.dec.com
Problems:                 reisert@eng.pko.dec.com

<Prev in Thread] Current Thread [Next in Thread>