Karlnet
[Top] [All Lists]

RE: [Karlnet] FCC certs and 100/200mw cards - possible group effort?

To: <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] FCC certs and 100/200mw cards - possible group effort?
From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
Reply-to: karlnet@WISPNotes.com
Date: Fri, 17 May 2002 11:31:02 -0500
List-post: <mailto:karlnet@WISPNotes.com>
I've offered before

for antennas that we really don't use, we will split the cost of FCC test
lab w/ anyone provided that they handle all the paperwork and filing and etc

-Charles

-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of Dan Metcalf
Sent: Friday, May 17, 2002 11:12 AM
To: 'karlnet@WISPNotes.com'
Subject: [Karlnet] FCC certs and 100/200mw cards - possible group
effort?


How about we put together a list of possible radio/antenna combos that we
want to use and split the costs for fcc certs?

Dan Metcalf
Wireless Broadband Systems
dan.metcalf@wbsysnet.com
781-658-2075
www.wirelessbroadbandsystems.com

-----Original Message-----
From: Norm Young [mailto:npyoung@applegatebroadband.net]
Sent: Friday, May 17, 2002 12:00 PM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] higher power cards, what works, what doesn't

Dan, I'm using a PRISM II card I got from Tony (it's a Senao,
http://www.senao-usa.com/SL-2011CDEXT.htm).  Had some initial problems with
it in my PtMP  (I think I may have some problems with connectors or with the
antenna itself) side, but switched over to the PtP side (I have an 18 mile
backhaul) and it seems to be working quite well.  (I'm surprised that
reflected RF, if that is what it was, would cause the card to fruit-out like
it did.  Rx sensitivity went to hell, and there were problems doing remote
reboots on the AP.)

Norm

----- Original Message -----
From: "Dan Metcalf" <danm@suncorstainless.com>
To: <karlnet@WISPNotes.com>
Sent: Friday, May 17, 2002 8:08 AM
Subject: [Karlnet] higher power cards, what works, what doesn't


> How many people out there are using the 100mw & 200mw cards w/ Karlnet
> v4.02? what works what doesn't? I couldn't get the symbol24 card to work.
> Also when you setup the rg1000 do you tell it what type of card is in the
> interface or do you leave it at default?
>
> Dan Metcalf
> Wireless Broadband Systems
> dan.metcalf@wbsysnet.com
> 781-658-2075
> www.wirelessbroadbandsystems.com
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet


<Prev in Thread] Current Thread [Next in Thread>