Doug
The rule of having more than 10% of FCS out of bytes in applies to PtMPt
links or just in a PtP links?
The question is because in my case having three sector anntenas to one AP
some of my customers are marginal and some not, so I´d like to know if the
poor links of some customers will cause some peformance issues in the others
having good quality links.
Luis Sosa
ITS
Merida, Mexico.
1+52-999-9230339
-----Mensaje original-----
De: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]En
nombre de Support
Enviado el: Jueves, 23 de Mayo de 2002 08:04 a.m.
Para: karlnet@WISPNotes.com
Asunto: {SPAM?} RE: [Karlnet] In Errors/FCS Errors
The FCS errors happen when only a partial frame makes it across the
connection. So if interference/noise steps on the frame, or if the link is
marginal, or if there is a bad connection in the cable, then FCS errors will
go up. Typically on a wireless link you will see these errors. A rule of
thumb is if they are above 10% of bytes in then you have a major problem.
Doug Harman
KarlNet, Inc.
525 Metro Place North
Suite 100
Dublin, OH 43017
614 822-5275 x 123
614 822-0024 fax
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
> Behalf Of Dan Metcalf
> Sent: Wednesday, May 22, 2002 1:03 PM
> To: 'karlnet@WISPNotes.com'
> Subject: RE: [Karlnet] In Errors/FCS Errors
>
>
> I see a high number of In Errors/FCS Errors on my AP, should I be able to
> match these errors w/ outbound errors at my CPE? Or could random *noise*
> cause these as well?
>
> Dan Metcalf
> Wireless Broadband Systems
> dan.metcalf@wbsysnet.com
> 781-658-2075
> www.wirelessbroadbandsystems.com
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|