FCS are per radio in either a point to point or multi-point
Doug Harman
KarlNet, Inc.
525 Metro Place North
Suite 100
Dublin, OH 43017
614 822-5275 x 123
614 822-0024 fax
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
> Behalf Of Scott Stevens
> Sent: Thursday, May 23, 2002 11:57 AM
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] In Errors/FCS Errors
>
>
> On 5/23/02 9:43 AM, "Luis Sosa" <lsosa@satelistar.com.mx> wrote:
>
> > Doug
> > The rule of having more than 10% of FCS out of bytes in applies to PtMPt
> > links or just in a PtP links?
> > The question is because in my case having three sector anntenas
> to one AP
> > some of my customers are marginal and some not, so I´d like to
> know if the
> > poor links of some customers will cause some peformance issues
> in the others
> > having good quality links.
> >
> > Luis Sosa
> > ITS
> > Merida, Mexico.
> > 1+52-999-9230339
> >
>
> The FCS errors happen on the interface so in a PtMP scenario if
> you have one
> link which is causing FCS that will be counted as total for that
> interface.
> If you exceed the 10% that means that either your PtP needs more umph. In
> PtMP it may mean bad cabling at base or CPE installs that are too weak or
> installed poorly.
>
> --
> Scott Stevens
> 800-815-4682
> scott@scottstevens.net
>
> orders@scottstevens.net
> support@scottstevens.net
> "Lucent, Karlnet, Alvarion, SmartBridge, Panels, Grids,
> Towers, WMUX, Wi-LAN, Licensed, WaveRider, Know How, ..."
>
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|