I can also Ping both RGs from within the same subnet and from another
subnet. I just get a Time Out when trying to access them through the
configurator.
Jim
----- Original Message -----
From: "Jim" <jim@daytonaccess.net>
To: <karlnet@WISPNotes.com>
Sent: Saturday, June 15, 2002 12:09 PM
Subject: Re: [Karlnet] Outgoing NAT config
> The client computer is getting an IP address from the DHCP server on the
RG.
>
> In IP setup on the RG I am assigning an IP from the Public block I am
using
> for the wireless segment of our network (206.244.190.xxx)
>
> In NAT on the RG I am using the same IP I assigned in the IP setup for the
> bridge as the Public IP.
>
> I am trying to access the RG from the our base in the NOC.
>
> Ethernet---Mikrotik Router---Base Radio---Remote Backfeed
> Radio---Ethernet---AP Radio---RG
>
> Jim
>
> ----- Original Message -----
> From: "Tony " <tonylist@wwwbiz.com>
> To: <karlnet@WISPNotes.com>
> Sent: Saturday, June 15, 2002 11:52 AM
> Subject: RE: [Karlnet] Outgoing NAT config
>
>
> > Jim
> >
> > Are you using an I from the NAT ip space on your system?
> >
> > Sincerely
> > Tony Morella
> > Demarc Technology Group
> > Office: 908-996-7995
> > Cell: 908-246-9170
> > Fax: 908-847-0202
> > email: tony@demarctech.com
> > http://www.demarctech.com
> > Wireless Solution Provider
> >
> >
> > -----Original Message-----
> > From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
> > On Behalf Of Jim
> > Sent: Saturday, June 15, 2002 11:31 AM
> > To: karlnet@WISPNotes.com
> > Subject: Re: [Karlnet] Outgoing NAT config
> >
> >
> > I am finding that when I do that, I can no longer access the RG through
> > the configurator.
> >
> > Jim
> >
> > ----- Original Message -----
> > From: "Tony " <tonylist@wwwbiz.com>
> > To: <karlnet@WISPNotes.com>
> > Sent: Saturday, June 15, 2002 11:22 AM
> > Subject: RE: [Karlnet] Outgoing NAT config
> >
> >
> > > Jim
> > >
> > > The pubic address should be set to the public address you want NAT to
> > > translate to. If you only have one public then yes.
> > >
> > > Sincerely
> > > Tony Morella
> > > Demarc Technology Group
> > > Office: 908-996-7995
> > > Cell: 908-246-9170
> > > Fax: 908-847-0202
> > > email: tony@demarctech.com
> > > http://www.demarctech.com
> > > Wireless Solution Provider
> > >
> > >
> > > -----Original Message-----
> > > From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
> > > On Behalf Of Jim
> > > Sent: Saturday, June 15, 2002 9:01 AM
> > > To: karlnet@WISPNotes.com
> > > Subject: [Karlnet] Outgoing NAT config
> > >
> > >
> > > In outgoing NAT config, should the Public Address and Mask be set to
> > > the same as the address assigned to the radio?
> > >
> > > Jim
> > >
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
|