Karlnet
[Top] [All Lists]

RE: [Karlnet] New KarlNet .bin files released

To: <karlnet@wispnotes.com>
Subject: RE: [Karlnet] New KarlNet .bin files released
From: "Dan Metcalf" <dan.metcalf@wbsysnet.com>
Reply-to: karlnet@WISPNotes.com
Date: Mon, 21 Oct 2002 16:01:13 -0400
List-post: <mailto:karlnet@WISPNotes.com>
I recently upgraded an ap to the new bin, it reboots now with heavy
traffic on the Ethernet port


Dan Metcalf
Wireless Broadband Systems
http://www.wbsysnet.com/
877-685-0578
dan.metcalf@wbsysnet.com


> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On
> Behalf Of Charles Chia Sheng Wu
> Sent: Wednesday, October 16, 2002 3:59 PM
> To: Agere@part-15.org
> Cc: isp-wireless@isp-wireless.com; karlnet@WISPNotes.com; equipment-
> l@wisp-equipment.net
> Subject: [Karlnet] New KarlNet .bin files released
> 
> v4.27
> 
> New Features of 4.27
> - MAC Auth Library (AP Radius and MAC Access List)
> - IP Multicast Pruning
> - Inhibit Private NAT through selected Interfaces
> - Block inter-client communication on the same interface
> - Simple Firewall
> - WEP Support for Intersil Cards in 802.11b mode
> - IAPP
> - PPoE Filtering
> - TurboCell Polling update for large Networks
> - Updated Windows based configurator
> - Updated Help Files and Documentation <g>
> - value range for pings is now 64-2000 Bytes (as opposed to the 1472
Byte
> limit)
> 
> 
> Corrected issues in 4.27
> 
> - RIP-2 in kernel 4.13 use triggered updates to send empty default
route
> - Station list is being corrupted re:RADIUS re-Auth
> - Permission denied problem for read only kernel and temp bin file not
> removed
> - Default Bandwidth throttling is not working correctly in kernel 4.02
> - Garbage collection is not working
> - RIP2 default gateway is not sent after learned by device
> - After initial upload of SEC only builds, AP option in the interface
is
> not
> dimmed
> - Base can not do Radius Authentication for Satellite when the other
> wireless interface is configuring in AP mode
> - Kernel 4.00 doesn't load on a WP-II
> - MIB-II Routing table is not updated
> - Outdoor Router does use 'preferred IP address' as source address for
> ICMP
> 'TTL expired in transit' message
> - Firewall option fails to function correctly with VPN / IPSEC through
the
> RG
> - Incoming NAT using wildcard port blocks Outgoing NAT for other
clients
> - DHCP Client of AP-1000 is renewing the IP addresses to soon
> 
> Features for next release
> - VLAN Support
> - Continued Improvement of Documentation
> - TurboCell Autoroam Feature
> 
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> ---
> [This E-mail scanned for viruses by Declude Virus]



<Prev in Thread] Current Thread [Next in Thread>