:) I'm guessing that it just creates a Firewall type rule that drops any of
the private nat addresses on the public side of the RG. It would seem that
even if you enabled bridging (while running nat) it would drop the private
IP's from the selected interface.
-bob
----- Original Message -----
From: "Dan Metcalf" <dan.metcalf@wbsysnet.com>
To: <karlnet@WISPNotes.com>
Sent: Monday, October 21, 2002 3:06 PM
Subject: RE: [Karlnet] New KarlNet .bin files released
> I asked this some exact question and some wise-ass gave me the
> "definition" of inhibit.
>
>
>
> Dan Metcalf
> Wireless Broadband Systems
> http://www.wbsysnet.com/
> 877-685-0578
> dan.metcalf@wbsysnet.com
>
>
> > -----Original Message-----
> > From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
> On
> > Behalf Of Larry Yunker - Cyber Broadcasting
> > Sent: Monday, October 21, 2002 4:00 PM
> > To: karlnet@WISPNotes.com
> > Subject: Re: [Karlnet] New KarlNet .bin files released
> >
> > What exactly does this do?
> >
> > - Inhibit Private NAT through selected Interfaces
> >
> > Does this somehow block a customer from running a NAT router (like a
> > Linksys
> > Cable-Modem-router) behind say an RG1000? If so, HOW????? Would it
> also
> > block Internet Connection Sharing??
> >
> >
> >
> > ----- Original Message -----
> > From: "Charles Chia Sheng Wu" <cwu@cwlab.com>
> > To: <Agere@part-15.org>
> > Cc: <isp-wireless@isp-wireless.com>; <karlnet@WISPNotes.com>;
> > <equipment-l@wisp-equipment.net>
> > Sent: Wednesday, October 16, 2002 2:59 PM
> > Subject: [Karlnet] New KarlNet .bin files released
> >
> >
> > > v4.27
> > >
> > > New Features of 4.27
> > > - MAC Auth Library (AP Radius and MAC Access List)
> > > - IP Multicast Pruning
> > > - Inhibit Private NAT through selected Interfaces
> > > - Block inter-client communication on the same interface
> > > - Simple Firewall
> > > - WEP Support for Intersil Cards in 802.11b mode
> > > - IAPP
> > > - PPoE Filtering
> > > - TurboCell Polling update for large Networks
> > > - Updated Windows based configurator
> > > - Updated Help Files and Documentation <g>
> > > - value range for pings is now 64-2000 Bytes (as opposed to the 1472
> > Byte
> > > limit)
> > >
> > >
> > > Corrected issues in 4.27
> > >
> > > - RIP-2 in kernel 4.13 use triggered updates to send empty default
> route
> > > - Station list is being corrupted re:RADIUS re-Auth
> > > - Permission denied problem for read only kernel and temp bin file
> not
> > > removed
> > > - Default Bandwidth throttling is not working correctly in kernel
> 4.02
> > > - Garbage collection is not working
> > > - RIP2 default gateway is not sent after learned by device
> > > - After initial upload of SEC only builds, AP option in the
> interface is
> > not
> > > dimmed
> > > - Base can not do Radius Authentication for Satellite when the other
> > > wireless interface is configuring in AP mode
> > > - Kernel 4.00 doesn't load on a WP-II
> > > - MIB-II Routing table is not updated
> > > - Outdoor Router does use 'preferred IP address' as source address
> for
> > ICMP
> > > 'TTL expired in transit' message
> > > - Firewall option fails to function correctly with VPN / IPSEC
> through
> > the
> > > RG
> > > - Incoming NAT using wildcard port blocks Outgoing NAT for other
> clients
> > > - DHCP Client of AP-1000 is renewing the IP addresses to soon
> > >
> > > Features for next release
> > > - VLAN Support
> > > - Continued Improvement of Documentation
> > > - TurboCell Autoroam Feature
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >
> > >
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > ---
> > [This E-mail scanned for viruses by Declude Virus]
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|