v4.27
New Features of 4.27
- MAC Auth Library (AP Radius and MAC Access List)
- IP Multicast Pruning
- Inhibit Private NAT through selected Interfaces
- Block inter-client communication on the same interface
- Simple Firewall
- WEP Support for Intersil Cards in 802.11b mode
- IAPP
- PPoE Filtering
- TurboCell Polling update for large Networks
- Updated Windows based configurator
- Updated Help Files and Documentation <g>
- value range for pings is now 64-2000 Bytes (as opposed to the 1472 Byte
limit)
Corrected issues in 4.27
- RIP-2 in kernel 4.13 use triggered updates to send empty default route
- Station list is being corrupted re:RADIUS re-Auth
- Permission denied problem for read only kernel and temp bin file not
removed
- Default Bandwidth throttling is not working correctly in kernel 4.02
- Garbage collection is not working
- RIP2 default gateway is not sent after learned by device
- After initial upload of SEC only builds, AP option in the interface is not
dimmed
- Base can not do Radius Authentication for Satellite when the other
wireless interface is configuring in AP mode
- Kernel 4.00 doesn't load on a WP-II
- MIB-II Routing table is not updated
- Outdoor Router does use 'preferred IP address' as source address for ICMP
'TTL expired in transit' message
- Firewall option fails to function correctly with VPN / IPSEC through the
RG
- Incoming NAT using wildcard port blocks Outgoing NAT for other clients
- DHCP Client of AP-1000 is renewing the IP addresses to soon
Features for next release
- VLAN Support
- Continued Improvement of Documentation
- TurboCell Autoroam Feature
|