At the lower levels the Turbo Cell protocol works similar to 802.11b ad-hoc
or point-to-point systems. Or at least it does not fuction as an AP and
send out 802.11b AP beacon messages. This may be part of the reason Karlnet
does not do Auto Fallback speeds with Turbo Cell.
I am under the impression it does the polling, NWID and "System Access Pass
Phrase" on top of that.
If this answer is confusing or wrong please ignore.
I also see this same issue when doing a link test on some customers.
Earl Fisher
ReliaNET
earl@relia.net
-----Original Message-----
From: Bob Hrbek [mailto:bhrbek@jagwireless.com]
Sent: Wednesday, October 30, 2002 2:53 PM
To: karlnet@WISPNotes.com
Subject: [Karlnet] Re: more link test questions
Here is my setup
AP-1000 w/ ISP base
RG-1000's w/ SOHO
Why when I do a link test at a client why do I not only get the
access point but adjacent clients? If I choose an adjacent client it looks
as if the clients are actually communicating with each other. It is
something I see all the time and would really like to know why they come up
this way.
Thanks,
Bob Hrbek
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|