First, Happy New Year all!
Second, when using POE on an RG-1x00, what is the
maximum voltage I should see at the RG end of the POE cable? It's hard to
regulate.
In my latest install, I used the standard RG wall
wart, and I get ~8.9 VDC at the RG, but the RG keeps rebooting, just like what
I see when I use some 100mW cards that draw more power.
How high can/should I go with the RG before it
starts to cause problems? 10V? 12V?
Any suggestions would be appreciated.
Travis
--
==============================
M. Travis Brown, MCSE
Network Systems Engineer
NetWave Internet
434.386.0656
travis@netwaveva.com
http://www.netwaveinternet.com
==============================