Karlnet
[Top] [All Lists]

RE: [Karlnet] New board - specifications & pricing

To: <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] New board - specifications & pricing
From: "Kevin Knuth" <kknuth@karlnet.com>
Reply-to: karlnet@WISPNotes.com
Date: Mon, 20 Jan 2003 13:08:22 -0500
List-post: <mailto:karlnet@WISPNotes.com>
We support the Prism 2.5, and Agere cards.  We will support 5Ghz cards as
they become available.

We are working with Atheros and Intersil as they move towards combo "g and
a" radios.

Kevin

-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of Larry Yunker (Cyber Broadcasting)
Sent: Monday, January 20, 2003 12:53 PM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] New board - specifications & pricing


What cards will this board support?  Prism 2.5 and Lucent? What about 5.X
cards??  any support for those?

----- Original Message -----
From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
To: <karlnet@WISPNotes.com>
Sent: Monday, January 20, 2003 11:51 AM
Subject: RE: [Karlnet] New board - specifications & pricing


> pricing for the 1 port board - $150 w/out power supply or card
> pricing for the 2 port board - $185 w/out power supply or card
>
> offlist if you want to be put on the beta list
>
> specs below...
>
> Full Version WPAP+ / WPBASE+
> SPECIFICATIONS
> CPU ST-PC Elite @ 133MHz
> BIOS KarlNet Optimized, PC-compatible, in Flash ROM.
> RAM 16MB on-board DRAM for programs and data.
> Storage 512KB on-board Flash ROM (BIOS and
> KarlNet firmware); Linear Flash support for factory loading.
> Data Interface
> PCMCIA / CARDBUS sockets
> 3.3/5V Selectable operations
> 10/100mbps Auto-sense Fast Ethernet
> Power Input 9V to 15V DC in, either from the Input Jack, or Power over
> Ethernet input from the RJ45 port supports the proposed IEEE 802.3af PoE
> Standard.  Power consumption ~9W fully loaded.
> Second Ethernet port may be used as a PoE injector when DC power is
applied
> to first Ethernet Port.
> Additional Features
> Fully Industrial Strength Chipset
> Reset / Reload Pushbutton Switches,
> Hardware Watchdog Timer,
> Programmable GPIO register for Input/Output,
> FCC Class A Certification
> Compact Flash Socket for Future Upgrades
> Piezo Buzzer
> Software control for header for external fan (voltage supply, 5 volt / 1
AMP
> or sync current)
> Speaker output header
> LEDs for Board Power status, Link/ Activity for Ethernets & Link /
Activity
> for PCMCIA / Cardbus sockets
> Form Factor 3.8" x 5.2" x 1.1" basic board size, with dual-side major
> component placement, the same basic mounting holes as the RG-1000.
> Operating Temperature
> -30°  to 55° Celsius (° to 131° Fahrenheit) predicted temperature range,
> with non-condensing humidity.
>
> Lower cost Version WPCPE+
> SPECIFICATIONS
> CPU ST-PC Elite @ 133MHz
> BIOS KarlNet Optimized, PC-compatible, in Flash ROM.
> RAM 16MB on-board DRAM for programs and data.
> Storage 512KB on-board Flash ROM (BIOS and
> KarlNet firmware); Linear Flash support for factory loading.  Compact
Flash
> socket for future software upgrades.
> Data Interface
> PCMCIA / CARDBUS sockets
> 3.3/5V Selectable operations
> 10/100mbps Auto-sense Fast Ethernet
> Power Input 9V to 15V DC in, either from the Input Jack, or Power over
> Ethernet input from the RJ45 port supports the proposed IEEE 802.3af PoE
> Standard.  Power consumption ~9W fully loaded.
> Additional Features
> Fully Industrial rated Chipset
> Reset / Reload Pushbutton Switches,
> Hardware Watchdog Timer,
> Programmable GPIO register for Input/Output,
> FCC Class A Certification
> Compact Flash Socket for Future Upgrades
> Piezo Buzzer
> Software control for header for external fan (voltage supply, 5 volt / 1
AMP
> or sync current)
> Speaker output header
> LEDs for Board Power status, Link/ Activity for Ethernets & Link /
Activity
> for PCMCIA / Cardbus sockets
> Form Factor 3.8" x 5.2" x .9" basic board size, with dual-side major
> component placement, the same basic mounting holes as the RG-1000.
> Operating Temperature
> -30°  to 55° Celsius (-22° to 131° Fahrenheit) predicted temperature
range,
> with non-condensing humidity.
>
>
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
> Behalf Of Bob Hrbek
> Sent: Monday, January 20, 2003 11:32 AM
> To: karlnet@WISPNotes.com
> Subject: [Karlnet] New board
>
>
>  When, where, how much?
>
>  We've been told January, available from some vendors and that you weren't
>  sure what the price would be.
>
>
>  Come on guys....you are putting nails in your coffin here.  We are
> deploying
>  new sites....trying to decide what to do.  Silence isn't helping you on
our
>  list of pros and cons.......
>
>  -bob
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>


_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet


<Prev in Thread] Current Thread [Next in Thread>