Radio value is hard for me to determine!
the other question was already answered.
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of Norm Young
Sent: Monday, January 20, 2003 1:27 PM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] New board - specifications & pricing
And how many cards? I notice the spec states PCMCIA / CARDBUS socket(s).
One of each? What's the best value radio to run in these things? The Ruby
chipset radio?
----- Original Message -----
From: "Larry Yunker (Cyber Broadcasting)" <leyunker@cbcast.com>
To: <karlnet@WISPNotes.com>
Sent: Monday, January 20, 2003 9:53 AM
Subject: Re: [Karlnet] New board - specifications & pricing
> What cards will this board support? Prism 2.5 and Lucent? What about 5.X
> cards?? any support for those?
>
> ----- Original Message -----
> From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
> To: <karlnet@WISPNotes.com>
> Sent: Monday, January 20, 2003 11:51 AM
> Subject: RE: [Karlnet] New board - specifications & pricing
>
>
> > pricing for the 1 port board - $150 w/out power supply or card
> > pricing for the 2 port board - $185 w/out power supply or card
> >
> > offlist if you want to be put on the beta list
> >
> > specs below...
> >
> > Full Version WPAP+ / WPBASE+
> > SPECIFICATIONS
> > CPU ST-PC Elite @ 133MHz
> > BIOS KarlNet Optimized, PC-compatible, in Flash ROM.
> > RAM 16MB on-board DRAM for programs and data.
> > Storage 512KB on-board Flash ROM (BIOS and
> > KarlNet firmware); Linear Flash support for factory loading.
> > Data Interface
> > PCMCIA / CARDBUS sockets
> > 3.3/5V Selectable operations
> > 10/100mbps Auto-sense Fast Ethernet
> > Power Input 9V to 15V DC in, either from the Input Jack, or Power over
> > Ethernet input from the RJ45 port supports the proposed IEEE 802.3af PoE
> > Standard. Power consumption ~9W fully loaded.
> > Second Ethernet port may be used as a PoE injector when DC power is
> applied
> > to first Ethernet Port.
> > Additional Features
> > Fully Industrial Strength Chipset
> > Reset / Reload Pushbutton Switches,
> > Hardware Watchdog Timer,
> > Programmable GPIO register for Input/Output,
> > FCC Class A Certification
> > Compact Flash Socket for Future Upgrades
> > Piezo Buzzer
> > Software control for header for external fan (voltage supply, 5 volt / 1
> AMP
> > or sync current)
> > Speaker output header
> > LEDs for Board Power status, Link/ Activity for Ethernets & Link /
> Activity
> > for PCMCIA / Cardbus sockets
> > Form Factor 3.8" x 5.2" x 1.1" basic board size, with dual-side major
> > component placement, the same basic mounting holes as the RG-1000.
> > Operating Temperature
> > -30° to 55° Celsius (° to 131° Fahrenheit) predicted temperature range,
> > with non-condensing humidity.
> >
> > Lower cost Version WPCPE+
> > SPECIFICATIONS
> > CPU ST-PC Elite @ 133MHz
> > BIOS KarlNet Optimized, PC-compatible, in Flash ROM.
> > RAM 16MB on-board DRAM for programs and data.
> > Storage 512KB on-board Flash ROM (BIOS and
> > KarlNet firmware); Linear Flash support for factory loading. Compact
> Flash
> > socket for future software upgrades.
> > Data Interface
> > PCMCIA / CARDBUS sockets
> > 3.3/5V Selectable operations
> > 10/100mbps Auto-sense Fast Ethernet
> > Power Input 9V to 15V DC in, either from the Input Jack, or Power over
> > Ethernet input from the RJ45 port supports the proposed IEEE 802.3af PoE
> > Standard. Power consumption ~9W fully loaded.
> > Additional Features
> > Fully Industrial rated Chipset
> > Reset / Reload Pushbutton Switches,
> > Hardware Watchdog Timer,
> > Programmable GPIO register for Input/Output,
> > FCC Class A Certification
> > Compact Flash Socket for Future Upgrades
> > Piezo Buzzer
> > Software control for header for external fan (voltage supply, 5 volt / 1
> AMP
> > or sync current)
> > Speaker output header
> > LEDs for Board Power status, Link/ Activity for Ethernets & Link /
> Activity
> > for PCMCIA / Cardbus sockets
> > Form Factor 3.8" x 5.2" x .9" basic board size, with dual-side major
> > component placement, the same basic mounting holes as the RG-1000.
> > Operating Temperature
> > -30° to 55° Celsius (-22° to 131° Fahrenheit) predicted temperature
> range,
> > with non-condensing humidity.
> >
> >
> > -----Original Message-----
> > From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
> > Behalf Of Bob Hrbek
> > Sent: Monday, January 20, 2003 11:32 AM
> > To: karlnet@WISPNotes.com
> > Subject: [Karlnet] New board
> >
> >
> > When, where, how much?
> >
> > We've been told January, available from some vendors and that you
weren't
> > sure what the price would be.
> >
> >
> > Come on guys....you are putting nails in your coffin here. We are
> > deploying
> > new sites....trying to decide what to do. Silence isn't helping you on
> our
> > list of pros and cons.......
> >
> > -bob
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|