Yes it still is have them in stock if needed. Also the 8139 is supported
but using the Flashrom you need a nic with EPROM support.
Sincerely, Tony Morella
Demarc Technology Group, A Wireless Solution Provider
Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202
http://www.demarctech.com
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Roger Boggs
> Sent: Friday, February 21, 2003 6:35 PM
> To: Karlnet Mailing List
> Subject: Re: [Karlnet] Suggestion for a custom made karlnet bridge
>
>
> Is the FlashRom module still available? Couldn't find any
> references to it on the revamped KarlNet web site.
>
> Was looking today at the Via EPIA
> motherboards trying to find what LAN chipset/emulation they
> used (I think it will used drivers for the RealTek 8139) and
> went to the KN site to check for compatible NIC hardware list
> and couldn't find that either.
>
> At 07:10 PM 2/21/03 -0300, you wrote:
> >Hi:
> >
> > I would like to build a karlnet bridge using a PC, so I would be
> >grateful to hear your advice on the subject.
> >
> >What is the best option: compact flash or flash rom ?
> >
> >Any brand recomendation ?
> >
> >Motherboard/cpu/ram/ethernet ?
> >
> >Thanks a lot !!
> >
> >[]'s
> >Helio.
> >
>
> Roger Boggs
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
>
>
|