*This message was transferred with a trial version of CommuniGate(tm) Pro*
welwojhonn
como te llamas'''
perra¿¿¿¿
----- Original Message -----
From: <karlnet-request@WISPNotes.com>
To: <karlnet@WISPNotes.com>
Sent: Saturday, March 29, 2003 12:52 AM
Subject: Karlnet Digest, Vol 3, Issue 38
> *This message was transferred with a trial version of CommuniGate(tm) Pro*
> Send Karlnet mailing list submissions to
> karlnet@WISPNotes.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> or, via email, send a message with subject or body 'help' to
> karlnet-request@WISPNotes.com
>
> You can reach the person managing the list at
> karlnet-owner@WISPNotes.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Karlnet digest..."
>
>
> Today's Topics:
>
> 1. Re: orinoco cards in AP1000 firmware version (Brett Hays)
> 2. RE: WPBASE+ with SENAO 200mw radio cards (Caleb Carroll)
> 3. RE: WPBASE+ with SENAO 200mw radio cards (Dan Metcalf)
> 4. RE: WPBASE+ with SENAO 200mw radio cards (Caleb Carroll)
> 5. WPBASE+ with SENAO 200mw radio cards (Don Starnes)
> 6. RE: WPBASE+ with SENAO 200mw radio cards (Tony Morella)
>
>
> ----------------------------------------------------------------------
>
> Date: Fri, 28 Mar 2003 13:24:47 -0500
> From: "Brett Hays" <bretth@htonline.net>
> To: "Karlnet Mailing List" <karlnet@wispnotes.com>
> Subject: Re: [Karlnet] orinoco cards in AP1000 firmware version
> Message-ID: <00aa01c2f557$503fe600$15c89f0c@htonline.net>
> References: <HDEOKLKLLJLPFPOPBEAKGEEGCMAA.kknuth@karlnet.com>
> Content-Type: text/plain;
> charset="iso-8859-1"
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Reply-To: Brett Hays <bretth@htonline.net>, Karlnet Mailing List
> <karlnet@WISPNotes.com>
> Message: 1
>
> Kevin,
>
> Reggie helped me yesterday to understand something I already
suspected,
> routing problem.
>
> Brett
>
>
> ----- Original Message -----
> From: "Kevin Knuth" <kknuth@karlnet.com>
> To: "Brett Hays" <bretth@htonline.net>; "Karlnet Mailing List"
> <karlnet@WISPNotes.com>
> Sent: Friday, March 28, 2003 9:26 AM
> Subject: RE: [Karlnet] orinoco cards in AP1000 firmware version
>
>
> > Brett,
> >
> > With Version 4.0 we started using a Tertiary firmware upgrade to the
card.
> > That means you do NOT have to flash the card, as we override the card
> > firmware with our own that is in the bin file.
> >
> > There are many things that could cause your problems. I suggest you
call
> > tech support and see if they can find anything obviously wrong.
> > 614-822-0023.
> >
> > Kevin
> > ____________________________________
> > Kevin R. Knuth
> > Business Development Manager
> > North America
> > Corporate Office: 614-822-5275 x130
> > Home Office: 260-424-9690
> > Cell Phone: 260-402-6086
> > Email: kknuth@karlnet.com
> > www.karlnet.com
> > ____________________________________
> >
> > This message is intended only for the use of the Addressee and may
contain
> > information that is CONFIDENTIAL. If you are not the intended
recipient,
> > you are hereby notified that any dissemination of this communication is
> > strictly prohibited. If you have received this communication in error,
> > please notify us immediately and erase all copies of the message and its
> > attachments. Thank you.
> >
> > -----Original Message-----
> > From: karlnet-bounces@WISPNotes.com
> > [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Brett Hays
> > Sent: Thursday, March 27, 2003 10:52 AM
> > To: Karlnet List
> > Cc: support@karlnet.com; Charles Chia Sheng Wu
> > Subject: [Karlnet] orinoco cards in AP1000 firmware version
> >
> >
> > Can anyone tell me the KN recommended firmware revisions for Orinoco
> Silver,
> > Avaya and WaveLAN cards when used in AP1000 running SA4400?
> >
> > I swapped out an AP1000 and card yesterday, no changes to config and now
I
> > am wondering if I may have an outdated firmware on the card because I am
> > seeing really sporadic ping times..
> >
> > The card there now says WaveLAN/IEEE STA Var=2 Ver=7.52, the one I
> replaced
> > which wasn't having the ping problems said Avaya Wireless PC Card STA
> Var=2
> > Ver=7.52. Is 7.52 the firmware revision?
> >
> > Any help appreciated.
> >
> > Brett Hays
> > Hometown Online
> > www.htonline.net
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
>
> ------------------------------
>
> Date: Fri, 28 Mar 2003 14:27:00 -0700
> From: "Caleb Carroll" <karlnet@pathcom.ca>
> To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
> Subject: RE: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> Message-ID: <200303281427000356.D963A763@mail.pathcom.ca>
> In-Reply-To: <NFEFKCBIHKKFPKEALKFJAEJBHDAA.cwu@cwlab.net>
> References: <NFEFKCBIHKKFPKEALKFJAEJBHDAA.cwu@cwlab.net>
> Content-Type: text/plain; charset="ISO-8859-1"
> MIME-Version: 1.0
> Content-Transfer-Encoding: 8bit
> Precedence: list
> Reply-To: Karlnet Mailing List <karlnet@WISPNotes.com>
> Message: 2
>
> These cards are all pretty much identical and Zcomax cards are just
expensive. We have a shitload of EnGenius cards (re-branded Senao) and
they've been working fine for months (as long as you're using TurboCell and
not 802.11b of course).
>
> We're using the EnGenius cards with RG-1100's and AP-1000's though, so I
can't help Don with this problem but somehow I doubt that the problem is
with the Senao cards.
>
> *********** REPLY SEPARATOR ***********
>
> On 2003-Mar-28 at 10:14 AM Charles Chia Sheng Wu wrote:
>
> >Senao cards are crap, use the Zcomax cards
> >
> >-Charles
> >
> >-----Original Message-----
> >From: karlnet-bounces@WISPNotes.com
> >[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Don Starnes
> >Sent: Friday, March 28, 2003 9:57 AM
> >To: Karlnet
> >Subject: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> >
> >
> >Hello everyone,
> >
> >I am having a hard time trying to get the new WPBASE+ to work with SENAO
> >200mw (Intersil 2.5) or 100mw (Intersil 2.0) radio cards. The board
> >recognizes the radios and will let you program them as usual. The
problem
> >seems to occur after they have been in service for a few hours. I get
very
> >erratic behavior from the boards such as:
> >1. Second radio stops working
> >2. Second radio disappears
> >3. Port shows empty PCMCIA when I know there is a card in it.
> >
> >I know everyone's setup can be different. We are using 12v 10a power
> >supplies to power these boards. We have version 4.43a bin file on the
> >radios.
> >
> >Any suggestions?
> >
> >Thank You,
> >
> >Don
> >
> >
> >_______________________________________________
> >Karlnet mailing list
> >Karlnet@WISPNotes.com
> >http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >_______________________________________________
> >Karlnet mailing list
> >Karlnet@WISPNotes.com
> >http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
>
>
> ------------------------------
>
> Date: Fri, 28 Mar 2003 18:21:37 -0500
> From: "Dan Metcalf" <dan.metcalf@wbsysnet.com>
> To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
> Subject: RE: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> Message-ID: <004d01c2f580$c8aa7af0$02563342@wbsysnet1>
> In-Reply-To: <200303281427000356.D963A763@mail.pathcom.ca>
> Content-Type: text/plain;
> charset="us-ascii"
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Reply-To: Karlnet Mailing List <karlnet@WISPNotes.com>
> Message: 3
>
> The senao cards I have used seem to over heat and RX became a
> problem.... are you able read the signal's?
>
> Dan Metcalf
> Wireless Broadband Systems
> http://www.wbsysnet.com/
> 781-577-2780
> dan.metcalf@wbsysnet.com
>
>
> > -----Original Message-----
> > From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com]
> > On Behalf Of Caleb Carroll
> > Sent: Friday, March 28, 2003 4:27 PM
> > To: Karlnet Mailing List
> > Subject: RE: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> >
> > These cards are all pretty much identical and Zcomax cards are just
> > expensive. We have a shitload of EnGenius cards (re-branded Senao)
> and
> > they've been working fine for months (as long as you're using
> TurboCell
> > and not 802.11b of course).
> >
> > We're using the EnGenius cards with RG-1100's and AP-1000's though, so
> I
> > can't help Don with this problem but somehow I doubt that the problem
> is
> > with the Senao cards.
> >
> > *********** REPLY SEPARATOR ***********
> >
> > On 2003-Mar-28 at 10:14 AM Charles Chia Sheng Wu wrote:
> >
> > >Senao cards are crap, use the Zcomax cards
> > >
> > >-Charles
> > >
> > >-----Original Message-----
> > >From: karlnet-bounces@WISPNotes.com
> > >[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Don Starnes
> > >Sent: Friday, March 28, 2003 9:57 AM
> > >To: Karlnet
> > >Subject: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> > >
> > >
> > >Hello everyone,
> > >
> > >I am having a hard time trying to get the new WPBASE+ to work with
> SENAO
> > >200mw (Intersil 2.5) or 100mw (Intersil 2.0) radio cards. The board
> > >recognizes the radios and will let you program them as usual. The
> > problem
> > >seems to occur after they have been in service for a few hours. I
> get
> > very
> > >erratic behavior from the boards such as:
> > >1. Second radio stops working
> > >2. Second radio disappears
> > >3. Port shows empty PCMCIA when I know there is a card in it.
> > >
> > >I know everyone's setup can be different. We are using 12v 10a power
> > >supplies to power these boards. We have version 4.43a bin file on
> the
> > >radios.
> > >
> > >Any suggestions?
> > >
> > >Thank You,
> > >
> > >Don
> > >
> > >
> > >_______________________________________________
> > >Karlnet mailing list
> > >Karlnet@WISPNotes.com
> > >http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >
> > >_______________________________________________
> > >Karlnet mailing list
> > >Karlnet@WISPNotes.com
> > >http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > ---
> > [This E-mail scanned for viruses by Declude Virus]
>
>
> ---
> [This E-mail scanned for viruses by Declude Virus]
>
> ------------------------------
>
> Date: Fri, 28 Mar 2003 17:23:46 -0700
> From: "Caleb Carroll" <karlnet@pathcom.ca>
> To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
> Subject: RE: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> Message-ID: <200303281723460405.DA05843C@mail.pathcom.ca>
> In-Reply-To: <004d01c2f580$c8aa7af0$02563342@wbsysnet1>
> References: <004d01c2f580$c8aa7af0$02563342@wbsysnet1>
> Content-Type: text/plain; charset="us-ascii"
> MIME-Version: 1.0
> Content-Transfer-Encoding: 8bit
> Precedence: list
> Reply-To: Karlnet Mailing List <karlnet@WISPNotes.com>
> Message: 4
>
> Yes, you can see signal values on both sides of the link if you start the
test from the BaseStation (you only see one side with signal values if you
start the link test from the client side).
>
> Additionally: You need to update your cards with the latest Prism 2.5
firmware to be able to see both sides of the link test from the base
station. see previous list messages for where to download firmware. Also
see previous emails regarding heat...
>
> *********** REPLY SEPARATOR ***********
>
> On 2003-Mar-28 at 6:21 PM Dan Metcalf wrote:
>
> >The senao cards I have used seem to over heat and RX became a
> >problem.... are you able read the signal's?
> >
> >Dan Metcalf
> >Wireless Broadband Systems
> >http://www.wbsysnet.com/
> >781-577-2780
> >dan.metcalf@wbsysnet.com
> >
> >
> >> -----Original Message-----
> >> From: karlnet-bounces@WISPNotes.com
> >[mailto:karlnet-bounces@WISPNotes.com]
> >> On Behalf Of Caleb Carroll
> >> Sent: Friday, March 28, 2003 4:27 PM
> >> To: Karlnet Mailing List
> >> Subject: RE: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> >>
> >> These cards are all pretty much identical and Zcomax cards are just
> >> expensive. We have a shitload of EnGenius cards (re-branded Senao)
> >and
> >> they've been working fine for months (as long as you're using
> >TurboCell
> >> and not 802.11b of course).
> >>
> >> We're using the EnGenius cards with RG-1100's and AP-1000's though, so
> >I
> >> can't help Don with this problem but somehow I doubt that the problem
> >is
> >> with the Senao cards.
> >>
> >> *********** REPLY SEPARATOR ***********
> >>
> >> On 2003-Mar-28 at 10:14 AM Charles Chia Sheng Wu wrote:
> >>
> >> >Senao cards are crap, use the Zcomax cards
> >> >
> >> >-Charles
> >> >
> >> >-----Original Message-----
> >> >From: karlnet-bounces@WISPNotes.com
> >> >[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Don Starnes
> >> >Sent: Friday, March 28, 2003 9:57 AM
> >> >To: Karlnet
> >> >Subject: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> >> >
> >> >
> >> >Hello everyone,
> >> >
> >> >I am having a hard time trying to get the new WPBASE+ to work with
> >SENAO
> >> >200mw (Intersil 2.5) or 100mw (Intersil 2.0) radio cards. The board
> >> >recognizes the radios and will let you program them as usual. The
> >> problem
> >> >seems to occur after they have been in service for a few hours. I
> >get
> >> very
> >> >erratic behavior from the boards such as:
> >> >1. Second radio stops working
> >> >2. Second radio disappears
> >> >3. Port shows empty PCMCIA when I know there is a card in it.
> >> >
> >> >I know everyone's setup can be different. We are using 12v 10a power
> >> >supplies to power these boards. We have version 4.43a bin file on
> >the
> >> >radios.
> >> >
> >> >Any suggestions?
> >> >
> >> >Thank You,
> >> >
> >> >Don
> >> >
> >> >
> >> >_______________________________________________
> >> >Karlnet mailing list
> >> >Karlnet@WISPNotes.com
> >> >http://lists.wispnotes.com/mailman/listinfo/karlnet
> >> >
> >> >_______________________________________________
> >> >Karlnet mailing list
> >> >Karlnet@WISPNotes.com
> >> >http://lists.wispnotes.com/mailman/listinfo/karlnet
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >> Karlnet mailing list
> >> Karlnet@WISPNotes.com
> >> http://lists.wispnotes.com/mailman/listinfo/karlnet
> >> ---
> >> [This E-mail scanned for viruses by Declude Virus]
> >
> >
> >---
> >[This E-mail scanned for viruses by Declude Virus]
> >
> >_______________________________________________
> >Karlnet mailing list
> >Karlnet@WISPNotes.com
> >http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
>
>
> ------------------------------
>
> Date: Fri, 28 Mar 2003 19:54:33 -0600
> From: "Don Starnes" <dons@wavemasters.com>
> To: <karlnet@wispnotes.com>
> Subject: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> Message-ID: <000801c2f596$268b2d30$02fa000a@2fast>
> Content-Type: text/plain;
> charset="iso-8859-1"
> MIME-Version: 1.0
> Content-Transfer-Encoding: quoted-printable
> Precedence: list
> Reply-To: Karlnet Mailing List <karlnet@WISPNotes.com>
> Message: 5
>
> When I do a wireless link test the local level is always 3% no matter =
> where the antenna is pointed. The remote level changes to reflect my =
> adjustments. I am receiving signal though because I can pass data.From
tonylist@wwwbiz.com Sat Mar 29 00:28:44 2003
> Received: from smtpa.ha-net.ptd.net (smtpa.ha-net.ptd.net [207.44.96.81])
> by contesting.com (8.12.8/8.12.2) with ESMTP id h2T5SiGU028895
> for <karlnet@WISPNotes.com>; Sat, 29 Mar 2003 00:28:44 -0500
> Received: (qmail 28354 invoked by uid 50005); 29 Mar 2003 05:28:43 -0000
> Received: from tonylist@wwwbiz.com by smtpa.ha-net.ptd.net by uid 50002
with
> qmail-scanner-1.15
> (uvscan: v4.1.60/v4252. spamassassin: 2.43. Clear:.
> Processed in 1.099287 secs); 29 Mar 2003 05:28:43 -0000
> Received: from pistol.msns.sm.ptd.net (HELO pistol) ([24.229.75.198])
> (envelope-sender <tonylist@wwwbiz.com>)
> by smtpa.ha-net.ptd.net (qmail-ldap-1.03) with SMTP
> for <karlnet@WISPNotes.com>; 29 Mar 2003 05:28:42 -0000
> From: "Tony Morella" <tonylist@wwwbiz.com>
> To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
> Subject: RE: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> Date: Sat, 29 Mar 2003 00:28:35 -0500
> Message-ID: <022f01c2f5b4$0eae2f50$6500a8c0@pistol>
> MIME-Version: 1.0
> Content-Type: text/plain;
> charset="us-ascii"
> Content-Transfer-Encoding: 7bit
> X-Priority: 3 (Normal)
> X-MSMail-Priority: Normal
> X-Mailer: Microsoft Outlook, Build 10.0.4024
> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
> Importance: Normal
> In-Reply-To: <200303281427000356.D963A763@mail.pathcom.ca>
> X-BeenThere: karlnet@WISPNotes.com
> X-Mailman-Version: 2.1
> Precedence: list
> Reply-To: Karlnet Mailing List <karlnet@WISPNotes.com>
> List-Id: Karlnet Mailing List <karlnet.WISPNotes.com>
> List-Unsubscribe: <http://lists.wispnotes.com/mailman/listinfo/karlnet>,
> <mailto:karlnet-request@WISPNotes.com?subject=unsubscribe>
> List-Archive: <http://dayton.akorn.net/pipermail/karlnet>
> List-Post: <mailto:karlnet@WISPNotes.com>
> List-Help: <mailto:karlnet-request@WISPNotes.com?subject=help>
> List-Subscribe: <http://lists.wispnotes.com/mailman/listinfo/karlnet>,
> <mailto:karlnet-request@WISPNotes.com?subject=subscribe>
>
> Caleb
>
> Have you done side by side testing with both cards? Look at the
> modulated RF signal on an SA? Watch the signal output on the cards over
> time? Test for RX levels changes, over time? Look at the internal
> chipsets and manufacturing processes used to make the cards?? Test in
> outdoor weather conditions??
>
> FYI we have tested and continue to test the Seano cards, this is
> compiled info on the testing:
>
> CH 1 2 3 4 5 6 7
> 8 9 10 11 12 13 14
> Turn on 24.5 24.5 24.3 24 23.9 23.7 23.5
> 23.5 23.4 23.2 23.1 23.1 23 20
> At 10 Min. 18.1 18.2 18.3 18.4 18.7 19 19.1
> 19.2 19.3 19.3 19.4 19.4 19.5 16.5
>
> Using the Internsel test info:
> http://www.demarctech.com/techsupport/rw-wireless-cards-support/wlan-rec
> eiver-test.pdf
>
> Sensitivity @ 11Mbps,FER<8%
> Ch1 Ch7 Ch14
> -83dB -83dB -83dB
>
> The Seano cards and Zcom cards are VERY different in there design, for
> one Seano uses a low cost 2nd stage that max out, where the Zcom cards
> uses a 500mW 2nd stage! The reason the Zcom cards cost more is simply
> because they use better quality components and have a better design
> which is the reason Demarc OEMs these cards. All the info is there to
> run the test your-self.
>
> Sincerely, Tony Morella
> Demarc Technology Group, A Wireless Solution Provider
> Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202
> http://www.demarctech.com
>
>
>
> > -----Original Message-----
> > From: karlnet-bounces@WISPNotes.com
> > [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Caleb Carroll
> > Sent: Friday, March 28, 2003 4:27 PM
> > To: Karlnet Mailing List
> > Subject: RE: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> >
> >
> > These cards are all pretty much identical and Zcomax cards
> > are just expensive. We have a shitload of EnGenius cards
> > (re-branded Senao) and they've been working fine for months
> > (as long as you're using TurboCell and not 802.11b of course).
> >
> > We're using the EnGenius cards with RG-1100's and AP-1000's
> > though, so I can't help Don with this problem but somehow I
> > doubt that the problem is with the Senao cards.
> >
> > *********** REPLY SEPARATOR ***********
> >
> > On 2003-Mar-28 at 10:14 AM Charles Chia Sheng Wu wrote:
> >
> > >Senao cards are crap, use the Zcomax cards
> > >
> > >-Charles
> > >
> > >-----Original Message-----
> > >From: karlnet-bounces@WISPNotes.com
> > >[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Don Starnes
> > >Sent: Friday, March 28, 2003 9:57 AM
> > >To: Karlnet
> > >Subject: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> > >
> > >
> > >Hello everyone,
> > >
> > >I am having a hard time trying to get the new WPBASE+ to work with
> > >SENAO 200mw (Intersil 2.5) or 100mw (Intersil 2.0) radio cards. The
> > >board recognizes the radios and will let you program them as usual.
> > >The problem seems to occur after they have been in service for a few
> > >hours. I get very erratic behavior from the boards such as:
> > 1. Second
> > >radio stops working 2. Second radio disappears
> > >3. Port shows empty PCMCIA when I know there is a card in it.
> > >
> > >I know everyone's setup can be different. We are using 12v
> > 10a power
> > >supplies to power these boards. We have version 4.43a bin
> > file on the
> > >radios.
> > >
> > >Any suggestions?
> > >
> > >Thank You,
> > >
> > >Don
> > >
> > >
> > >_______________________________________________
> > >Karlnet mailing list
> > >Karlnet@WISPNotes.com
> > >http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >
> > >_______________________________________________
> > >Karlnet mailing list
> > >Karlnet@WISPNotes.com
> > >http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> >
> >
>
>
> ------------------------------
>
> Date: Sat, 29 Mar 2003 00:52:03 -0500
> From: "Tony Morella" <tonylist@wwwbiz.com>
> To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
> Subject: RE: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> Message-ID: <025801c2f5b7$562327c0$6500a8c0@pistol>
> In-Reply-To: <022f01c2f5b4$0eae2f50$6500a8c0@pistol>
> Content-Type: text/plain;
> charset="us-ascii"
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Reply-To: Karlnet Mailing List <karlnet@WISPNotes.com>
> Message: 6
>
> Also another point I would like to make, look at the FCC cert for the
> Zcom card (Demarc) which is at .234 watts (234mW):
> https://gullfoss2.fcc.gov/cgi-bin/ws.exe/prod/oet/forms/misc/Grant_Form.
> hts?application_id=803728&mode=COPY&fcc_id=M4Y-0325H
>
> Vs
>
> Seano cards which are at .178 watts (178mW)
> https://gullfoss2.fcc.gov/prod/oet/cf/tcb/Tcb731GrantForm.cfm?applicatio
> n_id=311157&mode=COPY&fcc_id=NI3-2511CD-PLUS3
>
> This is a different of 56mW!!! Again just pointing out these two cards
> are very different.
>
> Sincerely, Tony Morella
> Demarc Technology Group, A Wireless Solution Provider
> Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202
> http://www.demarctech.com
>
>
>
> > -----Original Message-----
> > From: karlnet-bounces@WISPNotes.com
> > [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Tony Morella
> > Sent: Saturday, March 29, 2003 12:29 AM
> > To: 'Karlnet Mailing List'
> > Subject: RE: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> >
> >
> > Caleb
> >
> > Have you done side by side testing with both cards? Look at
> > the modulated RF signal on an SA? Watch the signal output on
> > the cards over time? Test for RX levels changes, over time?
> > Look at the internal chipsets and manufacturing processes
> > used to make the cards?? Test in outdoor weather conditions??
> >
> > FYI we have tested and continue to test the Seano cards, this
> > is compiled info on the testing:
> >
> > CH 1 2 3 4 5 6 7
> > 8 9 10 11 12 13 14
> > Turn on 24.5 24.5 24.3 24 23.9 23.7 23.5
> > 23.5 23.4 23.2 23.1 23.1 23 20
> > At 10 Min. 18.1 18.2 18.3 18.4 18.7 19 19.1
> > 19.2 19.3 19.3 19.4 19.4 19.5 16.5
> >
> > Using the Internsel test info:
> > http://www.demarctech.com/techsupport/rw-wireless-cards-suppor
> > t/wlan-rec
> > eiver-test.pdf
> >
> > Sensitivity @ 11Mbps,FER<8%
> > Ch1 Ch7 Ch14
> > -83dB -83dB -83dB
> >
> > The Seano cards and Zcom cards are VERY different in there
> > design, for one Seano uses a low cost 2nd stage that max
> > out, where the Zcom cards uses a 500mW 2nd stage! The reason
> > the Zcom cards cost more is simply because they use better
> > quality components and have a better design which is the
> > reason Demarc OEMs these cards. All the info is there to run
> > the test your-self.
> >
> > Sincerely, Tony Morella
> > Demarc Technology Group, A Wireless Solution Provider
> > Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202
> > http://www.demarctech.com
> >
> >
> >
> > > -----Original Message-----
> > > From: karlnet-bounces@WISPNotes.com
> > > [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Caleb Carroll
> > > Sent: Friday, March 28, 2003 4:27 PM
> > > To: Karlnet Mailing List
> > > Subject: RE: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> > >
> > >
> > > These cards are all pretty much identical and Zcomax cards
> > > are just expensive. We have a shitload of EnGenius cards
> > > (re-branded Senao) and they've been working fine for months
> > > (as long as you're using TurboCell and not 802.11b of course).
> > >
> > > We're using the EnGenius cards with RG-1100's and AP-1000's
> > > though, so I can't help Don with this problem but somehow I
> > > doubt that the problem is with the Senao cards.
> > >
> > > *********** REPLY SEPARATOR ***********
> > >
> > > On 2003-Mar-28 at 10:14 AM Charles Chia Sheng Wu wrote:
> > >
> > > >Senao cards are crap, use the Zcomax cards
> > > >
> > > >-Charles
> > > >
> > > >-----Original Message-----
> > > >From: karlnet-bounces@WISPNotes.com
> > > >[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Don Starnes
> > > >Sent: Friday, March 28, 2003 9:57 AM
> > > >To: Karlnet
> > > >Subject: [Karlnet] WPBASE+ with SENAO 200mw radio cards
> > > >
> > > >
> > > >Hello everyone,
> > > >
> > > >I am having a hard time trying to get the new WPBASE+ to work with
> > > >SENAO 200mw (Intersil 2.5) or 100mw (Intersil 2.0) radio
> > cards. The
> > > >board recognizes the radios and will let you program them
> > as usual.
> > > >The problem seems to occur after they have been in service
> > for a few
> > > >hours. I get very erratic behavior from the boards such as:
> > > 1. Second
> > > >radio stops working 2. Second radio disappears
> > > >3. Port shows empty PCMCIA when I know there is a card in it.
> > > >
> > > >I know everyone's setup can be different. We are using 12v
> > > 10a power
> > > >supplies to power these boards. We have version 4.43a bin
> > > file on the
> > > >radios.
> > > >
> > > >Any suggestions?
> > > >
> > > >Thank You,
> > > >
> > > >Don
> > > >
> > > >
> > > >_______________________________________________
> > > >Karlnet mailing list
> > > >Karlnet@WISPNotes.com
> > > >http://lists.wispnotes.com/mailman/listinfo/karlnet
> > > >
> > > >_______________________________________________
> > > >Karlnet mailing list
> > > >Karlnet@WISPNotes.com
> > > >http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> > >
> > >
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> >
> >
>
>
> ------------------------------
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
> End of Karlnet Digest, Vol 3, Issue 38
> **************************************
|