Bob,
Not sure about your hardware question, but I am curious which software
version you are running?
Kevin
**************************************
Kevin R. Knuth
Business Development Manager
North America
260-424-9690 Regional Office
614-822-5275 Corporate Office
kknuth@karlnet.com
www.karlnet.com
**************************************
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Bob Hrbek
Sent: Monday, November 17, 2003 11:02 AM
To: Karlnet Mailing List
Subject: [Karlnet] Flashrom hardware? How about a Routerboard 230?
I need a flashrom setup to handle a growing cell site. I have about 50
clients on a KN-200 board ( at least I think it is...it's the one with
two
PCMCIA interfaces). We upgraded from and AP-1000 when performance was
getting poor and it was NIGHT and day difference on ping times/latency
and user perception of performance.
Well, ping times are getting high again and I was considering replacing
the
KN-200 w/ some sort of a flashrom box. I want something small (a
little
larger than an AP-1000 would be ok but not much more. I just don't have
room for it.
Will the karlnet flashrom setup run on a routerboard 230 from Mikrotik?
It's a 266Mhz setup and outdoor rated w/ a PCI slot and 2 PCMCIA slots,
I believe. Thoughts?
Thanks,
Bob
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|