Hallo Bruno,
WPNTFIX.bin is renamed WPNT357.bin Why You need older 3.51 version? Latest is
version 3.95
Peter
> On Thu, 20 Nov 2003 15:38:19 +0200
> "Nelu Dumitru" <nelu@matco.ro> wrote:
> > This is a "used bin file" problem.
> > Try to download a new bin file and to upload this file to device.
>
> hello there
>
> I'm not sure if I understand what you're suggesting but
> in all cases we do the following
>
> exit program (if previously loaded)
> load program (AP MANAGER or CONFIG.EXE)
> load kernel (then load key, if aplicable)
> change the IP to local network
> upload software
> wait reboot to complete
> try to re-scan for the device
> not working, exit the program and start all over again
> (usually with the other one of ap manager or karlnet configurator)
>
> you're saying that you cannot load another kernel after loading
> the first one, without exiting/calling ap manager or config.exe
> for a second time?
>
> thanks for answering
> !3runo
>
> > Best regards,
> > Nelu Dumitru
> >
> > -----Original Message-----
> > From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com]
> > On Behalf Of Bruno Lopes F. Cabral
> > Sent: Thursday, November 20, 2003 3:21 PM
> > To: karlnet@wispnotes.com
> > Subject: [Karlnet] problems with SATELITE on WP-II
> >
> > Hello there
> >
> > I'm trying to help a friend install a karlnet satelite
> > license on a WP-II
> >
> > for some reason, the unit locks up after installing the firmware (load
> > kernel, import license key file, upload software, it appears to finish
> then
> > hang with all leds RED). yes, the license was generated for this unit (the
>
> > macaddress is OK) -- I've seen this when the license
> > was wrongly generated or was for the wrong device, which sometimes happen
> > when you have more than one AP ;^)
> >
> > one thing I found interesting is that, when we try to
> > upload back WPNT351.bin (WP-II latest firmware) with
> > Karlnet Configurator, it doesn't work
> >
> > when we do the same procedure using AP MANAGER, it upload
> > first the WPNTFIX.bin, _then_ it uploads WPNT351.bin.
> > in both cases we choose through the menus the same file
> > (WPNT351.bin)
> >
> > is Karlnet Configurator able to do this upload? if so, how?
> >
> > is there any known problem between karlnet firmware 4.31
> > and WP-II? (we also tried 4.43k with no luck either)
> >
> > any help on this would be greatelly appreciated
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|