[Karlnet] Low Cost "802.11g" Wireless Link Equipment

[Michael McDermott <michael@veritech.com.au>]

I'm trying to come up with a hardware solution for point-to-point routed 
link using the IEEE 802.11g spec. The link will not have to be long but 
offer 20+ Mbps bandwidth.

Anyone with experience/advice on how I would go about this? Anyone with 
experience with Soekris or MakroTik boards with 802.11g cards?

Any suggestions will be appreciated.

Regards,

Michael R McDermott BEng (Comp. Eng.), MACS, IEEE
Pre-Sales Technical Consultant
Veritech Australia Pty Ltd
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet