[Karlnet] ROR Firmware Upgrade

[Blair Drew Davis <theory@datawise.net>]

Rick,

You need the SA-4300 software if you want to use the AP-1000/AP-IIE as a Karlnet Sat. or as a Karlnet point to point master.  If you want to use it as an ISP Base for point to multi-point you need SA-4400 software.  If you wish to use the special encryption options, (beyond WEP), the part numbers are slightly different. 

Two places I have bought Karlnet products from are CW Labs in Chicago, IL (www.cwlab.com)  and Winncomm in Solon, OH  (www.winncom.com).

I have used Lucent hardware with Karlnet software almost from the start.  The Lucent hardware has been very reliable.  However, if you plan to use this unit as an ISP base, I would recommend you check into building a Flash ROM based unit instead.  The Lucent hardware is a bit slow when used as an ISP base with a large number of clients.


--
Blair Davis
West Michigan WISP
www.wmwisp.net
(269) 686-8648

AOL Instant Message Screen Name       theory240




_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet