Norm,
The 2nd port can be used for power another POE enabled device (ie: kn105
or kn50)
There are jumpers on the board to enable this feature.
I hadn't used the kn20x series due to the issues w/ the kn200, but the
kn205 I have been testing works GREAT and so do the kn50's w/ the
firmware...
I'm very happy, now we just need 802.11a & 802.11g support
Dan
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]
> On Behalf Of Norm Young
> Sent: Sunday, April 18, 2004 4:47 PM
> To: Karlnet Mailing List
> Subject: Re: [Karlnet] kn205 - 2nd ethernet port for power source
>
> Dan, I don't think that the second Ethernet port on the KN205 is PoE
> compatible, just the first.
>
> Again, I've got to say I'm favorably impressed with how well the KN205
> runs
> off of PoE and 24vdc---and I understand it supports voltages as high
as
> 48vdc. I'm going to change our solar powered main bus at the WIPOP
from
> 12vdc up to 24vdc this summer to take advantage of it.
>
> Norm
>
>
> ----- Original Message -----
> From: "Dan Metcalf" <dan.metcalf@wbisp.com>
> To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
> Sent: Saturday, April 17, 2004 5:27 PM
> Subject: RE: [Karlnet] kn205 - 2nd ethernet port for power source
>
>
> > If I wanted to power a kn105 from the 2nd port on the kn205, what
are
> > the power supply requirements to run the kn105 and kn205?
> >
> > Thanks,
> >
> > Dan
> >
> >
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> --
> [This E-mail scanned for viruses by Declude Virus]
>
--
[This E-mail scanned for viruses by Declude Virus]
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|