Orion
[Top] [All Lists]

[Orion] Question about noise floor

To: orion@contesting.com
Subject: [Orion] Question about noise floor
From: "BarryG" <n1eu@myway.com>
Reply-to: n1eu@myway.com
Date: Tue, 11 Nov 2003 20:51:31 -0500 (EST)
List-post: <mailto:orion@contesting.com>
 Appreciate W4ZV sharing his experience with the Orion AGC.  I've read 
Ten-Tec's excellent articles, and maybe I've missed something, but it seems 
like a piece of the puzzle is missing.  My understanding is that the digital 
AGC applies a varying degree of compression to signals above the threshold.  
The digital AGC does not amplify - a signal will emerge with the maximum gain 
if the digital AGC applies no compression to it. If this understanding is 
correct (and perhaps it is not), can someone please explain the following from 
the Optimization document:"The threshold value in the AGC system acts like an 
IF gain control for the receiver chain ? turn the value low (like to .37 uV) 
and the receiver gain comes up, as do the signal levels."  I would think that 
lowering the threshold will introduce compression and would lower the receiver 
gain.  I'd appreciate any help with what I'm missing here.  Perhaps the 
architecture is actually more complex. Thanks &amp; 73,Barry N1EU(no Orion yet 
to play on)     

_______________________________________________
No banners. No pop-ups. No kidding.
Introducing My Way - http://www.myway.com
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion

<Prev in Thread] Current Thread [Next in Thread>