Wonder if anyone else has noticed this.
Setup:
VFO A 18XX
VFO B 19XX
Mode: cw
Set PBT on VFO A to -60 (or whatever value)
Using A/B switch to VFO B.
If the Green LED is not on for PBT the value on the display doesn't change,
however, it appears it is reset to 0 offset. I have verified this by
listening to the background noise and by varying the value. As soon as you
rotate the control the display changes from -60 to 0 and then varies as the
control does.
If the Green LED is lit, the displayed value resets to 0 when switching A/B.
This is an annoyance issue more than anything else. I am just wondering if
others have seen this.
Thanks
Ron
N4XD
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.8 - Release Date: 1/3/2005
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|