Try transmitting into a dummy load and see if you hear
the distortion. I found I had to put a ferrite bead
on my headphones to stop RF getting onto the leads.
John
--- dbp@tds.net wrote:
> Hi-
> I have an Orion II which is used on CW and puts out
> good sounding audio into the speaker; but when I use
> any of 3 stereo headphones that had worked fine on
> my original Orion, the audio is now distorted.
> Bandwidth is not a factor. If I reduce the RF gain
> to 70 it is not distorted. It does not seem to make
> any difference at what pitch I am copying CW. I have
> tried a couple of system resets while retaining
> memories, and also not saving memories. Any ideas?
>
> 73 de dave in NH
>
>
> _______________________________________________
> Orion mailing list
> Orion@contesting.com
> http://lists.contesting.com/mailman/listinfo/orion
>
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|