Interesting, both of mine are the model prior, A/B/G/N, 100Mbit ethernet
ports will do 2.4 or 5 Ghz but not both at same time.
My PS units are Model A1202, listed at "Designed by Apple, assembled in
China", also say "Foxlink Technologies Limited".
Yours?
On Sat, 13 Mar 2010, dalej wrote:
> It's the Airport Extreme, very latest version. MC340LL/A.
>
> Dale, K9VUJ
>
>
>
> On 13, Mar 2010, at 5:55, Christopher E. Brown wrote:
>
>>
>> What model Airport? Mine are the extreme units, with the external power
>> supply. The AP itself is fine, just the switching PS that is noisy.
>>
>>
>> On Sat, 13 Mar 2010, dalej wrote:
>>
>>> Hello,
>>>
>>> Mine is brand new replacing a Netgear router which died after three years
>>> and never did work just right. This Airport router is dead silent where
>>> before with the Netgear I did have noise on the ethernet cables which I
>>> suppressed with snap-on #31 mix. If there is noise, I sure don't hear it.
>>> My neighbors light dimmer makes the noise here which I can't do anything
>>> about. I have a home network with three Apple boxes and two XP boxes, two
>>> wireless and the rest on ethernet cable hookups. One of the computers is
>>> on a very long ethernet cable, about 50 or 60 feet so if there were to be
>>> noise that one would be an excellent antenna.
>>>
>>> I sure wish my neighbor would get rid of that dimmer.
>>>
>>> 73
>>> Dale, K9VUJ
>>>
>>>
>>> On 12, Mar 2010, at 21:11, Christopher E. Brown wrote:
>>>
>>>> On Thu, 11 Mar 2010, dalej wrote:
>>>>> My Apple Airport router makes no noise.
>>>>> dale
>>>> Funny, the power supplies for both my Airport Extremes are horrible,
>>>> wideband *strong* trash 5Mhz and down.
>>>> I ended up using 14 turns through a 2.4" type31 toroid, 2 of them on each
>>>> side of the PS as close as I could get them.
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|