On 11/6/2010 12:31 PM, Dale Svetanoff wrote:
> Doc,
>
> I've said it before and I'll say it again: unless a power supply is
> designated specifically for communications applications, assume that it is
> NOT "clean enough" for communications usage.
I purchased a 40A lab supply at a very good price, (one Doc mentioned
earlier) with digital read out it took a bit of testing but it turned
out to be well regulated, and clean. Which BTW is also a switching
supply. Those big "conventional" supplies run just about a pound per amp.
The specifications for the PS will tell the story. There are many good
switching supplies out there, and there are a lot more that are not
suitable, but when you get ripple and noise figures in the 0.1% they are
likely pretty good.
73
Roger (K8RI)
> The unit in question is
> almost surely a switcher, and if intended for commercial applications, it
> will only meet FCC Part 15 Class A emission specs, which are several dB
> worse (higher) than the Class B requirements for computers and digital
> equipment used in the home. (Note that the seller is including shipping in
> the $50 price - that tells me that the unit is light weight, virtually
> guaranteeing it to be a switcher.)
>
> For truly "clean" power, get a "hernia-maker" - meaning a linear power
> supply, not a switcher. You only have to worry about 60 or 120 Hz hum and
> ripple with those. If you don't want big iron like that, then stick with
> the select group of switchers that are designed for communications
> applications. Those units will exceed performance of FCC Class B equipment
> by controlling both the radiated and conducted emissions. Yes, you will
> pay more, but you get what you pay for.
>
> If you watch closely, there are surplus equipment dealers (and people at
> hamfests) who sell off big linear power supplies very cheaply. They were
> the norm 20 or 30 years ago, and you can probably get one for under $50.
> You'll want to find it locally, however, as these babies usually weigh 40
> pounds or more when you start talking 50 amps (or greater) output current.
> Unless malfunctioning, they usually deliver clean power to the loads.
>
> 73, Dale
> WA9ENA
>
>
>> [Original Message]
>> From: doc@kd4e.com<doc@kd4e.com>
>> To: RFI List<rfi@contesting.com>
>> Date: 11/5/2010 9:35:04
>> Subject: [RFI] Anyone know if this 12v ps is RFI-clean?
>>
>> Anyone know if this 12v ps is RFI-clean?
>>
>> "12 Volt 47 Amp Power supplies"
>>
>> See picture here:
>> http://swap.qth.com/view_ad.php?counter=866425
>>
>> It looks like some sort of modified surplus server PS.
>>
>> I have asked the seller a couple of times but no clear
>> answer yet. Does it look familiar to anyone?
>>
>> --
>>
>> Thanks!& 73, doc, KD4E
>> http://KD4E.com
>> Have an http://ultrafidian.com day
>> Defend free speech or lose your freedom.
>> I don't google I SEARCH! http://ixquick.com
>> _______________________________________________
>> RFI mailing list
>> RFI@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|