[Top] [All Lists]

Re: [RFI] shopping for toroids

To: rfi@contesting.com
Subject: Re: [RFI] shopping for toroids
From: David Cole <dave@nk7z.net>
Reply-to: dave@nk7z.net
Date: Mon, 02 Dec 2013 08:54:06 -0800
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
Thanks for the info sir!!!
Thanks and 73's,
For equipment, and software setups and reviews see:
for MixW support see;
for Dopplergram information see:
for MM-SSTV see:

On Sun, 2013-12-01 at 13:04 -0800, Jim Brown wrote: 
> On 12/1/2013 12:41 PM, David Cole wrote:
> > I also would be interested!  If you are making a group order please let me 
> > know...
> This is something that needs to be organized with one or more local 
> clubs. The reason is shipping costs and breakage in shipping if they are 
> not packed well.  I've never seen breakage in full boxes packed by 
> Fair-Rite at the factory, but that's not true of those packed by others. 
> Also, the COST of shipping is very high as a percentage of the cost of 
> the part for small quantities, but relatively small for full boxes 
> shipped by ground.
> An appendix in k9yc.com/RFI-Ham.pdf includes a worksheet to help decide 
> how many pieces of various sizes of parts to order. Once you know how 
> many of each part you are going to order, you simply go to the Fair-Rite 
> website, select the tab for getting quotations from a distributor, and 
> get them from at least three for full box quantities. My best quotation 
> this time around was from Dexter Magnetics near Chicago, Kreiger (in VA) 
> was next, and Mouser was high (by a lot).
> 73, Jim K9YC
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi

RFI mailing list

<Prev in Thread] Current Thread [Next in Thread>