Just wondering: if there have been any attempts to design or fabricate an
outboard hardware adapter for older model radios to enable the use of S
Meter Lite?
I may be wrong, but it seems like some receiver's AGC voltage could be
sampled in such a way as to interface with the S Meter Lite software.
Ray, W4BYG
-----Original Message-----
From: RFI [mailto:rfi-bounces@contesting.com] On Behalf Of David Cole
Sent: Monday, May 26, 2014 10:04 PM
To: rfi@contesting.com
Subject: Re: [RFI] My RFI - weekly report.
Try S-Mater Lite... See my review of it at:
http://nk7z.net/review-of-s-meter-lite/
Then download it at:
http://www.seed-solutions.com/gregordy/Software/SMeterLite.htm
Very handy program!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|