On 23 Aug 2019 at 10:27, Leonard Halvorsen via RFI wrote:
> Us older guys remember something called Q-DOPE.
> We used it at the Lab to attach all kinds of stuff, not just on coils.
> Can you even GET that stuff anymore?
>
> Leo H.
> WA2AMW
I make my own: A pint of MEK from the local hardware store, and as many
styrofoam cups
as I can crush and allow to dissolve in the MEK, then tightly capped.
A pint jar with 1/2 pint or so of MEK in it will normally take at least 20 ea 8
oz sized cups.
When it takes more than a minute to dissolve the bits, then stop.
If air is kept away from it, it will last a long time.
Applied evenly with a small paint brush to coils of any kind it dries clear and
hard.
Works wonders.
Ken W7EKB
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|