The sheilding on Cat-6A is more about the lan signal not getting interfered
with vs not interfering with stuff
-----Original Message-----
From: RFI <rfi-bounces+charlie=thegallos.com@contesting.com> On Behalf Of
K9MA
Sent: Tuesday, January 16, 2024 2:11 PM
To: rfi@contesting.com
Subject: Re: [RFI] USB Cable Shield Resistance was: Re: [N1MM+] open
question about RFI & USB
For what it's worth, I wired my whole house with unshielded CAT 6 cable,
before the shielded stuff and connectors were available. While I do have a
bunch of ferrite on the cables at the router, etc., I've had no incoming RFI
problems, even on 160, where I feed 1.5 kW to my shunt fed tower about 15
meters from the house. I suspect some of the router birdies I hear are
coming from my own router, and perhaps shielded cables would have reduced
them. I'm not sure how much it would really help, as all my neighbors have
routers, too. In any case, I'm all done crawling around in the attic
insulation, so those cables aren't going to get shielding.
73,
Scott K9MA
--
Scott K9MA
k9ma@sdellington.us
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|