Re: [RFI] USB Cable Shield Resistance was: Re: [N1MM+] open question about RFI & USB

[Jim Brown <jim@audiosystemsgroup.com>]

On 1/16/2024 2:36 PM, Clay Autery wrote:
> IME, range from "not measurable with commonly available equipment/technique
My 40 year old Fluke 8060A will get down below 0.1 Ohms.

The issue is not shield resistance, but rather 1) whether it is a shield 
or a wire, 2) the quality of the shield, and 3) where it is connected on 
both ends.
73, Jim K9YC

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi