Name is all that is required from DX stations!
C'Ya, Shelby - K4WW
----- Original Message -----
From: Bill Turner <firstname.lastname@example.org>
To: John <email@example.com>; <firstname.lastname@example.org>
Sent: Saturday, July 21, 2001 7:54 AM
Subject: Re: [RTTY] setting up fpr NAQP
> John, please don't repeat the received info when you QSL the other
> station's report. When there is QRN/QRM it can easily be mistaken for
> YOUR report. It's best to just say "QSL ur <myname> <myQTH>" and let
> it go at that. This is true for all contests, not just NAQP.
> Comments, anyone?
> 73, Bill W7TI
> ----- Original Message -----
> From: "John" <email@example.com>
> To: <firstname.lastname@example.org>
> Sent: Saturday, July 21, 2001 4:09 AM
> Subject: Re: [RTTY] setting up fpr NAQP
> > I have been through the WF1B help (alt h) and cannot see anywhere
> where the
> > NAME field required for NAQP is supported by one of the buffer
> > Am I missing something ??? - I want to setup a function
> > that will qsl a report given to me with something like...
> > "<1> I QSL your <rxname> / <2> - for your log my name is <txname>
> QSL ?? de
> > <11> k"
> > John - vk4cej
> > PS.. The way I read the rules there is no need for signal strength /
> > readability / tone reports (599)... is this correct ???
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> RTTY mailing list