RTTY
[Top] [All Lists]

[RTTY] 50 Baud

To: <rtty@contesting.com>
Subject: [RTTY] 50 Baud
From: on4aoi@ping.be (ON4AOI)
Date: Thu, 6 Jun 2002 14:22:30 -0000
MAYBE just MAYBE,
ED is doing this (50 baud and also 75 baud) to make sure it is him and not
some pirat,
and maybe ARRL will consider to make this contacts acceptable also.

73 Guy ON4AOI

BAND DECODER and related stuff at
http://users.skynet.be/ON4AOI/banddecoder.shtml

DX4WIN soft and related stuff at
http://users.skynet.be/ON4AOI/dx4win.shtml

DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at
http://users.skynet.be/ON4AOI/keyer.shtml

ARSWIN link and related stuff at
http://users.skynet.be/ON4AOI/web7.htm

DXTELNET soft and related stuff at
http://users.skynet.be/ON4AOI/dxt.shtml

MY SALESPAGE with radioamateur & computer parts
http://users.skynet.be/ON4AOI/sale.shtml
----- Original Message -----
From: "Don Hill AA5AU" <aa5au@bellsouth.net>
To: "Bill Hawkins" <w5ec@bellsouth.net>; <RTTY@contesting.com>
Sent: Thursday, June 06, 2002 2:04 PM
Subject: Re: [RTTY] 50 Baud


> I'm guessing that he is using 50 baud by mistake.  Not sure what s/w he
> is using, maybe Mix32? or something like that.  I have seen on a couple of
> occasions where it was spotted that he went from 45 to 50 baud.  Perhaps
> he is accidentally putting the program in 50 baud and not knowing about
it.
>
> I don't think 50 baud should be a problem on HF.  The problem is realizing
> the difference in speed from 45 to 50.  You will get some print from a 50
> baud signal even if you are set to receive 45.  If are still in the hunt
for Ed,
> just remember to change speeds when you come across a station that is not
> printing but you feel it should be.
>
> By the way, Ed's back on 21081 right now at 50 baud.  No copy here
remotely
> as the antenna is pointed at YA.
>
> 73, Don AA5AU
>
> ----- Original Message -----
> From: "Bill Hawkins" <w5ec@bellsouth.net>
> To: <RTTY@contesting.com>
> Sent: Thursday, June 06, 2002 6:28 AM
> Subject: [RTTY] 50 Baud
>
>
> > I see on some postings some comments about P5/4L4FN using 50 baud RTTY.
> > Is this bad?
> > Some comments say it is to high.
> > Bill
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>



<Prev in Thread] Current Thread [Next in Thread>