Ed is really booming in here now. Great print even with my antenna
off 50 degrees! Still at 50 baud. Congrats to Ron, K5DJ, for a
contact at 1557Z.
Now to work the YA!
Don AA5AU
----- Original Message -----
From: "Don Hill AA5AU" <aa5au@bellsouth.net>
To: "Bill Hawkins" <w5ec@bellsouth.net>; <RTTY@contesting.com>
Sent: Thursday, June 06, 2002 9:04 AM
Subject: Re: [RTTY] 50 Baud
> I'm guessing that he is using 50 baud by mistake. Not sure what s/w he
> is using, maybe Mix32? or something like that. I have seen on a couple of
> occasions where it was spotted that he went from 45 to 50 baud. Perhaps
> he is accidentally putting the program in 50 baud and not knowing about it.
>
> I don't think 50 baud should be a problem on HF. The problem is realizing
> the difference in speed from 45 to 50. You will get some print from a 50
> baud signal even if you are set to receive 45. If are still in the hunt for
> Ed,
> just remember to change speeds when you come across a station that is not
> printing but you feel it should be.
>
> By the way, Ed's back on 21081 right now at 50 baud. No copy here remotely
> as the antenna is pointed at YA.
>
> 73, Don AA5AU
>
> ----- Original Message -----
> From: "Bill Hawkins" <w5ec@bellsouth.net>
> To: <RTTY@contesting.com>
> Sent: Thursday, June 06, 2002 6:28 AM
> Subject: [RTTY] 50 Baud
>
>
> > I see on some postings some comments about P5/4L4FN using 50 baud RTTY.
> > Is this bad?
> > Some comments say it is to high.
> > Bill
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
|