As discussed below, KN is the correct prosign to use when
you want only the station specified to respond. K is used
when accepting a response from anyone. BK, however, means
break and is used in lieu of signing one or both callsigns.
BK isn't equivalent to KN.
73
Bob
AA0CY
-----Original Message-----
From: rtty-admin@contesting.com
[mailto:rtty-admin@contesting.com]On
Behalf Of Jim Martin
Sent: Wednesday, January 08, 2003 3:51 AM
To: rtty
Subject: Re: [RTTY] DE
The DE certainly distinguishes your call from the rubbish
coming up on
screen. N1MMLogger does not depend on the DE before a call
is highlighted.
This I think is great in marginal conditions.
On the subject of K at the end of transmission I think the
old CW ops were
100% right. If I know a stations callsign (or part of it)
and I see a K at
the end of his transmission I will then feel free to drop in
my callsign
(now with a DE at the front!).
K is an invitation to ANY station to transmit. However if I
am looking for
my QSO partner, or specific station, to reply I will send KN
which means I
only want him to reply. (or BK)
Why change a convention that has worked for a long long
time?
73
DE Jim MM0BQI
----- Original Message -----
From: "Nils Collin, SM6BSK" <nils.collin@telia.com>
To: <RTTY@contesting.com>
Sent: Tuesday, January 07, 2003 9:49 PM
Subject: [RTTY] DE
> Gentlemen,
>
> Speaking abt "DE" I just wonder why so many of you have
dropped the "DE"
in front of your call when calling or answering a CQ? ;-)
Maybe it
sounds "tougher", but it sure makes some annoyance if you
have to reach for
the mouse to catch your call!
>
> 73, Nils
> SM6BSK
>
>
> --------------
> email: nils.collin@telia.com
> --------------
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|