Hi Paul,
if you want to transmit with FSK you have to use the FSK-connector
(4-pole DIN) of the FT-1000MP.
You may have a look at my website www.qsl.net/dl6jz ant then click on
"Station & Technics". You will find my settings for the FT-1000MP and
WriteLog there.
73 + 55
Wolf, DL6JZ
Paul Brice-Stevens schrieb:
> Hi all,
> My first post to the RTTY reflector and its I'm afraid a
> plea for
> help...I for the life of me cannot get rtty to work for
> me (nut behind
> the wheel I suspect)...here the working condx
>
> Using WL with MTTY decoder
> Through G3LIV Isoterm interface into the Packet port of
> FT1KMP
> Receive and decode through Creative Labs SB1024 5.1
> Digital
>
> It appears to receive OK but when I kick it into transmit
> I just get a
> long tone...no diddle as it were?...the radio puts out
> power (checked
> into dummy load through PWR meter) however I do not
> appear to be getting
> RTTY out of the other end as it were?
>
> Anyone out there care to help a RTTY neophyte take his
> first steps...I
> think better off list as I am sure no one wants to be
> bored reading the
> airing of my problems in public
>
> 73
>
> Paul G0WAT
> --
> Paul Brice-Stevens
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|