The cables on the web site don't support the 870, at least one iteration. My
buddy just ordered one and it doesn't work. He needs the RCA cable to the
rig. Bux used to have such a cable on their web site, but it is gone.
73, Tom, W1TO
----- Original Message -----
From: "k0bx@qsl.net" <k0bx@yahoo.com>
To: <rtty@contesting.com>
Sent: Friday, March 12, 2004 10:16 AM
Subject: Re: [RTTY] need help interfacing TS850 to Hal DXP38
> Tom, I do not know if this is a correct statement or
> not?
>
> The prewired 13 pin cable is $5.95 and has all 13 pin
> wired.
>
> As for the cable that go with the Rascal, for the
> newer Kenwoods, TS-2000, TS-870 and TS-570 there is a
> cable that supports FSK.
>
> For the older Kenwoods, TS-940, 950 and 850. Yes you
> are correct they do not support FSK. On the 850 you
> need a RCA cable going to the RS-232 port from the RCA
> on the back of the rig.
>
> Joe K0BX
>
> --- Tom Homewood <w1to@adelphia.net> wrote:
> > Check the connections very carefully before you
> > order. (wiring diagram).
> >
> > The Kenwood cables don't support FSK as advertised.
> >
> > Tom, W1TO
> >
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Search - Find what you're looking for faster
> http://search.yahoo.com
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|