Hi,
After reading the archive here I decided to install a Turtle Beach Santa Cruz
sound card in my new computer last night. I removed the drivers from my
existing sound card (on the motherboard) and de-activated it. I then installed
the Sanat Cruz as specified in the instruction. I set it up on MMTTY. All
worked great. I even worked VP2ENK on 20m RTTY. I turned off the computer
(had to go back to work). When I got home I turned on the computer. It
wouldn't start. System recovered from a serious error (I choose go back to the
last know working setup). When it did start the Sanat Cruz was no longer
installed. I tried to reinstall it and it wouldn't. I reinstalled the
motherboard sound card and everything was back to normal. This morning I tried
again, this time with the intentions of installing it as a second sound card.
As soon as I turned it on the computer it would not start. I removed teh card
and it started fine.
So, Does that mean I have a bad Santa Cruz card? Anyone else have a problem
with these cards?
73,
Art
W2NRA
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|