Sounds more like a driver problem -- you might try re-downloading a new one
from the Turtle Beach web site.
73,
Dave, AA6YQ
-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
Behalf Of Art Searle W2NRA
Sent: Wednesday, November 24, 2004 7:40 AM
To: RTTY@contesting.com
Subject: [RTTY] Turtle Beach Santa Cruz problem?
Hi,
After reading the archive here I decided to install a Turtle Beach Santa
Cruz sound card in my new computer last night. I removed the drivers from
my existing sound card (on the motherboard) and de-activated it. I then
installed the Sanat Cruz as specified in the instruction. I set it up on
MMTTY. All worked great. I even worked VP2ENK on 20m RTTY. I turned off
the computer (had to go back to work). When I got home I turned on the
computer. It wouldn't start. System recovered from a serious error (I
choose go back to the last know working setup). When it did start the Sanat
Cruz was no longer installed. I tried to reinstall it and it wouldn't. I
reinstalled the motherboard sound card and everything was back to normal.
This morning I tried again, this time with the intentions of installing it
as a second sound card. As soon as I turned it on the computer it would not
start. I removed teh card and it started fine.
So, Does that mean I have a bad Santa Cruz card? Anyone else have a problem
with these cards?
73,
Art
W2NRA
_______________________________________________
RTTY mailing list
RTTY@contesting.com http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|