RTTY
[Top] [All Lists]

Re: [RTTY] extfsk & omni6

To: Ed <w3nr@comcast.net>
Subject: Re: [RTTY] extfsk & omni6
From: Ed <w3nr@comcast.net>
Date: Wed, 28 Feb 2007 18:21:00 -0500
List-post: <mailto:rtty@contesting.com>
Ed wrote:
> Anyone care to share the correct settings to use extfsk with the omni ? 
> I have it installed, called cq more than I care...no joy. Evidently I 
> have something,somewhere, set wrong. Any one care to help
> 
> Ed W3NR


Thanks to everyone for their time and comments. Several had it correct 
that the Omni 5/6 require a +/- voltage from the TXD pin. Several also 
had some good ideas, but did not understand the TT FSK cicuit. TT is 
unique that it uses what I refer to as true FSK. They actually shift the 
frequency via 2 crystals 170 hz apart.

The reason I was trying extfsk was to determine why the Omni would no 
longer transmit in FSK. This all happened about the time I changed from 
a desktop to a laptop computer. So was it the laptop or the rig. Well I 
have determined its the rig itself. I plugged a 9 volt battery into the 
FSK socket and the rig did not switch to transmit.

So, bottom line, using extfsk with the Omni 5/6 will not and does not 
work. I have the choice of using AFSK  or getting the rig repaired.

Thanks again...interesting discussion......73

Ed W3NR
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>