RTTY
[Top] [All Lists]

Re: [RTTY] BARTG HSS? Re: High speed RTTY

To: <g3ldi@g3ldi.co.uk>
Subject: Re: [RTTY] BARTG HSS? Re: High speed RTTY
From: "Junior" <charlesw_anderso@bellsouth.net>
Date: Fri, 29 Jan 2010 18:17:59 -0000
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Roger,
 I worked f4ewp with his 20watts about 95 percent copy.
Also ua6arr with 50watts.
I spotted a few stations showing 75b who were actually at 45b...forgot I
changed back !
73
Charles/kk5oq
 

-----Original Message-----
From: Roger Cooke [mailto:g3ldi@g3ldi.co.uk] 
Sent: Friday, January 29, 2010 4:45 PM
To: Junior
Cc: 'rttycontesting'
Subject: Re: [RTTY] BARTG HSS? Re: High speed RTTY

Hi Charles.

    Thanks for the nice chat on 75 bauds this afternoon. We were certainly
speeding along there very nicely, although it was difficult keeping up with
the typing! It helps keep the brain stimulated though !!

  I also worked Joe, K4HMB, so two contacts this afternoon on 75 Bauds.
I will be there from time to time calling CQ at that speed, so please bear
it in mind and give it a try.

  I have antenna / rotator and linear problems at present so will get those
sorted out and be in a better state as soon as we get some warmer weather.

  Thanks for trying guys and look forward to more.

73 de Roger, G3LDI

Junior wrote:
> Roger is on 14090.1 1425z with 80watts 75b and solid copy during the 
> 20min chat.
> 73
> Charles/kk5oq
>  
>
> -----Original Message-----
> From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] 
> On Behalf Of Jerry Flanders
> Sent: Friday, January 29, 2010 1:59 PM
> To: g3ldi@g3ldi.co.uk; Peter Laws
> Cc: John Barber GW4SKA; RTTY Reflector
> Subject: Re: [RTTY] BARTG HSS? Re: High speed RTTY
>
> At 05:55 AM 1/29/2010, Roger Cooke wrote:
>   
>> Hi.
>>
>>
>> John, GW4SKA, our Contest Manager is away for another week or so and 
>> on his return will try to get the 75 Baud contest organised.
>>
>> 73 de Roger, G3LDI, Chairman BARTG
>>     
>
> If it catches on, it may set a precedent for other contests. Please 
> consider using 7 bit ASCII, perhaps at 75 Baud, so we could start 
> moving away from the ltrs/figs shift problem.
>
> Jerry W4UK
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>   

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>