On Mon, Sep 19, 2011 at 16:04, Peter Laws <plaws@plaws.net> wrote:
> On Mon, Sep 19, 2011 at 12:52, Kok Chen <chen@mac.com> wrote:
>
>> If the modem that is optimized for 45.45 baud does not change the internal
>> filter for 75 baud operation, the SNR does not go up. However, something
>> even worse happens since a 75 baud signal will cause some pretty severe
>> inter-symbol interference (a signal QRM'ing itself, so to speak :-). You
>> can even see this effect when using 45.45 baud, if you use a crystal filter
>> in a rig that is too narrow, without also having an appropriate shape for
>> binary 45.45 baud data.
>>
>
>
> I wondered about this when I was trying to copy K9MUG/4. All I did
> was set MMTTY to "decode" 45.45 bauds. I didn't fiddle with any of
I meant 75 bauds!!
> the other 10,000 settings on the config screen (for fear I'd delete
> half the internet if I did).
>
> I'm guessing that what I really need is a 75-baud "profile" in MMTTY
> that optimizes things for that speed (along the lines of 23-Hz shift
> profile that's distributed with the software).
>
> Anyone done that that is willing to share?
>
>
> --
> Peter Laws | N5UWY | plaws plaws net | Travel by Train!
>
--
Peter Laws | N5UWY | plaws plaws net | Travel by Train!
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|