I no longer have the fine motor coordination that would allow me to
build such a cable (especially since I would need two of them). Is
anyone aware of a company that could build such a custom cable for a
reasonable price??
Dick
--
Dick Flanagan K7VC
dick@k7vc.com
On 2/1/2012 10:24 AM, Holger Gatternig wrote:
>
> Hello Dick,
>
> i use the line out from the ACC connector. Here is a picture from the
> cable i soldered
> special for the DXP38.
>
> https://plus.google.com/photos/115226722017066959959/albums/5704232608438962305/5704232643615426674
>
>
> vy 73 de Holger, OE9GHV
>
>
> Am 01.02.2012 18:40, schrieb Dick Flanagan:
>> Hi, Holger.
>>
>> I want to thank you and everyone else who has contributed to this topic.
>> Your configuration is very similar to mine.
>>
>> Do you use audio directly from your ICOM speaker output or do you put it
>> in parallel with the audio output from the ACC connector on the back of
>> the radio? The microHAM radio connector is a potted plug and I'm just
>> wondering where you tap into the audio with your Y-connector?
>>
>> Thanks again to everyone for their help.
>>
>> Dick
>> --
>> Dick Flanagan K7VC
>> dick@k7vc.com
>>
>> On 2/1/2012 9:21 AM, Holger Gatternig wrote:
>>>
>>> Hello to the group,
>>>
>>> i am using a DXP-38 as a additional decoder. The setup consist of a
>>> 756pro3 with Digikeyer2
>>> and a K3 with a Digikeyer. The easies way to do this is a simple Y cable.
>>> For the K3 you can use a simple stereo audio Y cable connected direct to
>>> the radio.
>>> For the pro3 i soldered an Y adapter to connect the DXP-38 to the audio
>>> out from my rig.
>>> The only reason i stopped using the dxp as a decoder is the software
>>> from HAL.
>>> Every few secounds i hear a "pling" from the pc speaker. This is really
>>> annoying.
>>> Does anyone know a software for the DXP-38 without this annoying sounds?
>>>
>>> MixW is my main programm for RTTY (only FSK), but i use always more than
>>> one decoder.
>>> Most of the time i use MMTTY and/or Airlinkexpress (excellent decoder!)
>>> as a additional RTTY decoder.
>>> The built in decoder from my pro3 is also always on witch is one of the
>>> best RTTY decoders i know.
>>>
>>>
>>> vy 73 de Holger, OE9GHV
>>>
>>>
>>>
>>> Am 01.02.2012 05:34, schrieb Dick Flanagan:
>>>> I know some folks run multiple RTTY decoders, with one of them often
>>>> being MMTTY and the other a DXP38. Is it possible to run these two
>>>> decoders with one radio or is SO2R necessary?
>>>>
>>>> Dick
>>>> --
>>>> Dick Flanagan K7VC
>>>> dick@k7vc.com
>>>>
>>>> On 1/31/2012 8:15 PM, Joe Subich, W4TV wrote:
>>>>>
>>> _______________________________________________
>>> RTTY mailing list
>>> RTTY@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/rtty
>>>
>>>
>>>
>>>
>>>
>> _______________________________________________
>> RTTY mailing list
>> RTTY@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
>
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|